Aggregate Resources Gravel Pit — Accidents

Total: 24 accidents | Fatalities: 0

Date Classification Injury Days Lost Narrative
09/23/2024 HANDTOOLS (NONPOWERED) DAYS AWAY FROM WORK ONLY 1d lost Employee was changing VSI parts. EE was using a hammer to pound on parts, to loosen them up for removal. As EE was doing this, EE got a small piece of steel in EE's right eye. EE went to an ophthal...
01/11/2024 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None Employee was using a battery powered impact wrench to tighten a a bolt that was head high. The wrench slipped off the bolt and kicked back, hitting EE in the mouth. EE split lower lip open and chipp...
01/04/2023 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None Employee was using a pressure washer to clean debris from underneath a truck scale. While doing this, the nozzle slipped, causing an abrasion on the back of the employee's right hand, similar to a bu...
01/15/2021 HANDLING OF MATERIALS DAYS AWAY FROM WORK ONLY 25d lost Sometime in January (employee is unsure of date), employee was lifting a steel beam. EE picked it up and put it on EE's shoulder. EE felt pain in EE's left shoulder. The pain persisted for several...
08/13/2020 HANDTOOLS (NONPOWERED) DYS AWY FRM WRK & RESTRCTD ACT 112d lost, 23d restricted Employee was using a sledge hammer to pound a nut on the mantle of a coarse crusher. EE felt something in the right elbow. It resulted in swelling and loss in range of motion.
02/08/2019 SLIP OR FALL OF PERSON NO DYS AWY FRM WRK,NO RSTR ACT None Employee was walking, slipped on ice. Theye twisted right knee. EE didn't want to see doctor. It still hurt on Feb. 13 so they visited doctor. They told them to ice it, wear compression sleeve. EE we...
01/11/2018 SLIP OR FALL OF PERSON NO DYS AWY FRM WRK,NO RSTR ACT None Employee was working on an auger; EE slipped and hit EE's right knee on the auger's edge. EE finished the work day and went home. Later EE's knee swelled up, was bruised. EE went to the doctor the...
06/06/2016 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None Employee was using an air compressor with an air sprayer to clean out the cab of truck. When employee was on way home that night, right eye started to bother. Went to the doctor the next day, and th...
10/27/2014 HANDLING OF MATERIALS DAYS AWAY FROM WORK ONLY 2d lost The EE was changing a screen panel on processing plant. He threw the old panel over the plant hand rail. The panel fell back. It hit the EE, knocking his hard hat off & hitting him on the right side o...
05/15/2014 HANDTOOLS (NONPOWERED) DYS AWY FRM WRK & RESTRCTD ACT 1d lost, 59d restricted Employee was using an iron bar to hammer in the skirt rubber on a conveyor. He missed or slipped, and hit his right hand on the edge of the hopper box. He broke the pinky finger on his right hand.
10/25/2013 HANDLING OF MATERIALS DAYS AWAY FROM WORK ONLY 6d lost EE was working in a van, roll-up door was open part way. Was climbing in. Part of body & one leg were in,& was pushing himself the rest of the way in. Foot slipped, & scraped his right shin on the edg...
10/14/2011 HANDLING OF MATERIALS DYS AWY FRM WRK & RESTRCTD ACT 2d lost, 37d restricted EE was cleaning out scale. As he was putting the top doors back on, he felt a ""pop"" in his left elbow, followed by pain and cramping in his left bicep.
08/29/2011 HANDLING OF MATERIALS DYS AWY FRM WRK & RESTRCTD ACT 11d lost, 14d restricted Employee was repairing a primary crusher, when he strained some muscles in his groin. He saw the company doctor, who diagnosed the injury as a hernia. He was referred to a surgeon. NOTE: The employee...
07/12/2010 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None EE was changing screens when he pulled some muscles in his stomach area. He waited a couple of days to see if it would improve. It didn't, so he went to see the doctor on July 26th. He was diagnosed w...
08/21/2008 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None Employee dropped a pipe wrench on his hand, 4 days later he told his foreman he had a hard spot on his wrist.
02/12/2008 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None Employee was using a cutting torch to cut material. Apparently, the connection was loose where the torch and hose came together. This caused the fitting to leak a little. The torch ignited, burning th...
01/18/2007 MACHINERY DAYS AWAY FROM WORK ONLY 1d lost Employee was welding off and on all day on a jaw crusher, doing repairs. He was wearing a welding helmet, but he was ina tight spot, so it was difficult to get the mask down in time, every time, befor...
07/19/2006 MACHINERY DAYS AWAY FROM WORK ONLY 1d lost Employee was working in an area where another employee was doing some welding and was accidently exposed to welders flash. After work, later that night, he had problems with his eyes, so he went to a...
02/16/2004 SLIP OR FALL OF PERSON DAYS AWAY FROM WORK ONLY 14d lost EE WAS REPAIRING A CRUSHER. HE STEPPED UP ON THE LEDGE OF THE CRUSHER TO TIGHTEN A BOLT, WHEN HIS FOOT SLIPPED AND HE FELL 3 FEET, BREAKING HIS WRIST.
04/14/2003 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None EE WAS TWISTING A WIRE TIE, WHEN HIS HAND SLIPPED AND HE CUT HIS LEFT INDEX FINGER
10/21/2002 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 2d restricted EMPLOYEE WAS CLIMBING DOWN HE LADDER TO EXIT A FRONT END LOADER. HIS FOOT SLIPPED ON THE LADDER. HE LOST HIS FOOTING, HITTING HIS LEFT RIBS ON HIS LEFT SIDE ON THE LADDER, AND PARTIALLY TEARIN G HIS R...
10/04/2001 SLIP OR FALL OF PERSON DYS AWY FRM WRK & RESTRCTD ACT 1d lost, 3d restricted EMPLOYEE WAS GREASING THE PINS ON A FRONT-END LOADER. WHEN HE WAS FINISHED, HE STEPPED BACK, BUT MISSED HIS STEP, FALLING DOWN. HE TRIED TO CATCH HIMSELF WITH HIS RIGHT ARM, BUT HE CAUGHT IT O N PART...
06/18/2001 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None EMPLOYEE CUT HIS FINGER ON A PULLEY, REQUIRED 8 STITCHES.
07/07/2000 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None EE WAS USING A TORCH TO CUT METAL & HE BURNED HIS RIGHT HAND