Arcosa Streetman Plant # 1605 — Accidents

Total: 93 accidents | Fatalities: 1

Date Classification Injury Days Lost Narrative
07/08/2024 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 6d restricted EE was repairing a hinge on a metal storage box and felt discomfort in left shoulder area. Clinic was called and EE opted for self-care. On 07/15/2024 EE was seen by a medical professional and was ret...
05/09/2024 POWERED HAULAGE FATALITY Fatal May 9, 2024 at 0800 hours when a manlift operator ran EE's manlift, an 8008 JLG, serial number 0300310942, into the canopy covering the C35 conveyor belt coming out of C35 tunnel. The operator was pi...
03/03/2024 FIRE ACCIDENT ONLY None At appromently 8:30 an employee was using a chop saw in the maintenance shop when the ee notice a fire on the wall. The employee extinguished the the fire and continued to work, at 8:47 the employee n...
11/08/2021 POWERED HAULAGE DAYS RESTRICTED ACTIVITY ONLY 74d restricted Employee was driving John Deere Gator from parts room. EE said had a fitting in EE's right hand. The fitting fell and EE bent over to pick it up from the floor board while driving over covered drainag...
03/09/2021 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 61d restricted On 3/9/2021 the miner was prying a log out of the cooler discharge EE felt discomfort in EE's right lower back. The miner reported this to EE's supervisor and stated that EE didn't want to go and have...
05/24/2020 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 39d restricted While cleaning raw material build up from feed hopper skirt board with a scraping bar the employee attempted to strike an over size chunk of material and smashed right index finger and thumb on the co...
03/27/2020 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None Employee was replacing an A/C blower motor at MCC-3. While removing electrical tape and zip ties with a knife the knife slipped lacerating the employee's left thumb.
03/09/2020 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 26d restricted While cleaning the kiln feed pipe a piece of material dislodged in the feed chute striking the EE on the left thumb causing a displaced fracture of distal phalanx of finger.
06/13/2019 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 57d restricted Operator was cleaning C-9 product chute. While chipping material with an air chisel, a rock fell onto the operators hand causing a laceration on the left thumb
04/23/2019 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 33d restricted Employee was pulling tray from material splitter. As ee was pulling the tray out, the right side hung up. EE then pulled with left hand only to dislodge it. This is when ee felt a pain in left shoulde...
07/23/2018 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 7d restricted Employee was removing five gallons sample buckets from a pickup when they felt a pain in the lower back.
07/04/2017 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 33d restricted Employee was attempting to break up compacted material inside extruder hopper. Employee used a large auger part to strike the side of the hopper. Employee smashed employee's finger between the auger p...
04/07/2017 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 85d restricted Employee was walking to the employee building. Employee turned to left to go back inside the shop and slipped on some loose gravel spraining right hand.
01/12/2016 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 20d restricted On 1/12/16 employee was cleaning up a material spill. EE thought EE had pulled a muscle in EE's stomach. Employee reported the injury to EE's shift supervisor. However, the supervisor did not report t...
03/08/2015 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None Employee was using a cutting torch to cut a return roller bracket off the C-51 conveyor system. He moved his left hand in front of the torch, burning himself. Employee reported to leadman but the lead...
12/11/2014 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 10d restricted EE's were installing a dogbone, the dogbone slipped off the shaft smashing hand of other EE. The bone slipped of the cooler side shaft. The injured employee reached up to keep the bone from striking a...
08/31/2014 OTHER DAYS RESTRICTED ACTIVITY ONLY 4d restricted Employee was cleaning a chute on a conveyor system. He was in a squatted position for several minutes, when he tried to stand up he pulled a muscle in his lower back.
08/26/2014 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 7d restricted Employee was moving oil barrels in shop and pulled a muscle in his lower left back.
08/15/2013 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None At 8:45am EE was remodeling the birdhouse (load out shack). He shot his left index finger with a staple gun.
06/06/2012 SLIP OR FALL OF PERSON DAYS AWAY FROM WORK ONLY 131d lost EE was dismounting WA50 Wheel Loader and had just taken foot off of step and he took 1 or 2 steps back when he fell backwards on material or uneven ground. EE could not get up or move his right leg af...
05/25/2012 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 8d restricted Employee had just finished cleaning C-10 chute and he started to climb out of chute, bringing his left leg against belt to pull himself out, when felt a pain, but pain went away and he did not report...
05/22/2012 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 4d restricted Employee was lifting a heavy equipment tire that was mounted on a dayton rim from the ground. The tire was lying flat on hard ground. Employee was lifting one side of tire to get it vertical to roll t...
05/12/2012 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 35d restricted Employee received a call that work on C-7 was completed. Due to excessive noise during the call, he moved to the platform on south side of cooler to hear better and due to poor lighting, tripped over...
04/26/2012 DISORDERS (REPEATED TRAUMA) OCCUPATNAL ILLNESS NOT DEG 1-6 None Employee had his annual HCI hearing test here at the Plant on 4/26/12. The results showed a STS had occurred and that the STS met the criteria for a recordable shift on Form 300. We sent him for a r...
04/18/2012 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 4d restricted EE was reaching into tool box when lid fell striking his right hand, lacerating his knuckle.
03/13/2012 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 2d restricted Employee on 3/13/12 approximately at 08:00 AM was preparing ls160 bobcat tire and rim for repair. He lifted the rim on to work table and picked up a 4 lb. sledge hammer to repair bent rim when he felt...
02/21/2012 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 30d restricted Employee was checking the water pump for refueling. When he came up on the pump he noticed the gas cap was off. As he was trying to put the cap back on the pump caught fire. Employee ran to the neares...
02/09/2012 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 3d restricted IE was working along with another EE to increase production of our precoat material. While catching several samples, IE picked up bucket of material with both hands and set it down above the scales....
10/19/2011 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 1d restricted EE was rigging a chain to make a lift. EE's left ring finger was pinched by the other of two chains on the crane.
04/28/2011 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None Employee was using his personal pocket knife to open a tube of silicon caulking. He was cutting toward his thumb when the knife slipped and cut his right thumb.
02/04/2011 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 6d restricted EE was attempting to remove the shear bolt & nut from the hinged mouthpiece on the extruder. EE had to pull upwards on the nut to loosen & remove. While pulling upwards EE felt something pull in his...
01/14/2011 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 8d restricted EE was using a 4 lb. shop hammer and a 1 3/4"" combination wrench to loosen nuts on coal mill bowl.EE struck the wrench with the hammer and this caused the wrench to bounce up and strike EE on top of...
11/29/2010 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 1d restricted EE's were cleaning the raw shale buildup from C-34 tripper chute. While cleaning the chute, IE was using a pneumatic chipping gun and when IE tried to change his footing he slipped and hit his left c...
10/05/2010 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 38d restricted EE was helping co-worker smooth concrete out by dragging a water hose across concrete after it had been floated. He tripped over a piece of 1"" flat bar, causing him to fall on his right knee.
09/27/2010 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 3d restricted EE removed troughing idler from frame of C-13 and carried it about 40 feet. When he lifted the idler over inside of handrail to throw to the ground, he felt a tearing pain in his right shoulder.
08/06/2010 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 5d restricted At approximately 3:30 PM on 8/6/10 EE & co-worker were assigned the task of cleaning of SC#1 belly pan. EE was working at removing buildup of raw shale from the upper section of the belly pan with a p...
04/14/2010 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 6d restricted At approximately 9:00 PM on 4/14/2010 while working at the emergency hopper, employee was using a 12 ft. long, 1/2"" diameter air lance to help wet raw shale from sticking to the hopper walls. Employe...
02/05/2010 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 11d restricted At approximately at 8:00 AM on 2/5/2010, Injury was pulling auger sections out of the extruder along with #1 EE, #2 EE and #3 EE. Injury was taking the augers and tossing them on the ground. He had...
10/16/2009 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 11d restricted Employee was in the quarry pit area setting off a shot and there was flying rock from the shot. EE was running to get away from flying rock when he slipped and fell due to the ground being wet from r...
08/18/2009 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 3d restricted While dismounting skid steer loader, Injured caught his right hand in between the skid bar and the roll over cab. He sustained a sprain/strain to the right hand. He was working on the finish end ins...
05/01/2009 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None EE was air-arc gouging on frame damage to a scraper. The area was very small and at or above head level causing his head to be surrounded by billowing air, fumes dust and grit. EE felt that he had go...
04/06/2009 OTHER DAYS RESTRICTED ACTIVITY ONLY 1d restricted Injury was cleaning Screen #6 on a very windy afternoon. Material blew in his right eye. His eye began to bother him on his way home. He reported this the next morning on 4/7/09 to his supervisor. He...
02/01/2009 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 16d restricted Injury was at the coal unloader placing the vibrator on the railcar. He was using a ratchet and pipe to tighten up bolts, while performing this job, he complained that his right shoulder was hurting...
12/04/2008 OTHER DAYS RESTRICTED ACTIVITY ONLY 21d restricted While dismounting Haul Unit #157 from the left side door, the wind closed the door on injured's right hand before he could remove his hand out of the way. The wind was gusting about 15-20 MPH from th...
07/08/2008 STEPPING OR KNEELING ON OBJECT DAYS RESTRICTED ACTIVITY ONLY 33d restricted EE was walking out of the loadout building when he stepped on a grain scoop with the front part of his right foot. Stepping on the scoop bent his toes and his foot had some pain. EE reported this inc...
02/07/2008 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 5d restricted Employee was loosening motor mounting bolts on Triple Roll Crusher using a socket and 3/4"" ratchet. He exerted force and didn't remember any type of slipping or jerking, but began to feel a pressure...
02/04/2008 POWERED HAULAGE PERM TOT OR PERM PRTL DISABLTY 1d lost, 65d restricted EE was helping Maintenance work on C-34 conveyor belting when his left hand was pulled in to pulling block between 3/8"" cable and sheave. The cable tightened causing his left hand and fingers to be...
01/23/2008 POWERED HAULAGE DAYS RESTRICTED ACTIVITY ONLY 99d restricted EE was working 12 hours on the loader & operator fatigue could have caused him to not have proper posture while running the loader. Cause of injury is unclassified because of insufficient data, but h...
10/13/2007 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None Employee was working with several others in the loadout front silo. He began to experience discomfort in his right eye. After some days with no improvement, he went to the eye doctor who found an im...
09/10/2007 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 79d restricted EE was welding a patch above the jaw crusher and he drove a piece of 4"" channel iron into the gap between the jaw Pittman and the hopper above the serve as a seat. When repositioning his body, the ch...