Beck Sand & Gravel, Inc. — Accidents
Total: 13 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 03/03/2025 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | None | EE was using the drive belts to rotate log washer tubes for maintenance on a cold day, EE's glove caught the drive belt and EE's finger was pinched between the drive belt and the motor sheave. X-rays... |
| 07/01/2022 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Miner was performing maintenance on a hydraulic excavator. A pin was being driven out of the end bearing of a hydraulic cylinder. As the pin was pushed through the cylinder bearing the bar used to p... |
| 03/23/2022 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While removing bolts from a worn cutting edge the employee attempted to keep a bolt head from spinning and the sharp edge of the worn bolt cause the injury. The employee sustained lacerations to two f... |
| 08/31/2016 | POWERED HAULAGE | DYS AWY FRM WRK & RESTRCTD ACT | 17d lost, 9d restricted | Miner was operating an articulating haul truck when the park brake was applied unexpectedly. The truck came to an abrupt halt. The operator was wearing a safety belt but the sudden stop ""jarred"" t... |
| 05/31/2016 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 5d lost | Employee was servicing a Cat 307 Excavator in the shop. The employee had stepped down from the machine to get a tool and was climbing back up to remove an access cover from the hydraulic tank when ha... |
| 03/09/2016 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 1d lost | Employee was working on the North Processing Plant. Two employees were working together, one was inside the tub of a sand screw replacing wear shoes and the other (the injured employee) was outside t... |
| 07/30/2012 | POWERED HAULAGE | NO DYS AWY FRM WRK,NO RSTR ACT | None | Haul Truck operator was attempting to service the air conditioning unit in the truck's cab when the middle finger on his left hand contacted the fan blade of the circulating blower. Tip of finger was... |
| 08/24/2006 | MACHINERY | DAYS AWAY FROM WORK ONLY | 2d lost | Operator was cleaning accumulated material near the feeder pan of the processing plant when he pinched his right index finger. The tip of the finger bone was broken and a laceration required stitches... |
| 10/11/2005 | SLIP OR FALL OF PERSON | DYS AWY FRM WRK & RESTRCTD ACT | 6d lost, 3d restricted | EE WAS CLOSING THE DOOR ON THE CAT 245 WHEN HE LOST HIS BALANCE AND GRABBED FOR THE HANDRAIL BEHIND THE DOOR WHEN HE GOT HOLD OF THE OPEN SIDE PANEL DOOR. HAVING TWO MOVING DOORS, HE LOST HIS BALANCE... |
| 08/08/2005 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EMPLOYEE WAS REMOVING A SCREEN FROM THE TOP OF SAND PLANT WHEN HE PUSHED THE SCREEN OVER HIS HEAD & TURNED AT THE SAME TIME. |
| 03/27/2002 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 2d lost | OPERATOR WAS ATTEMPTING TO UNROLL CONVEYOR BELTING FROM A SUSPENDED ROLL WHEN THE ROLL CAME UNHOOKED AND FELL ON HIS FOOT. THE ROLL OF BELT HAD AN ELONGATED CENTER HOLE AS IT DID NOT HAVE A CO RE. IT... |
| 08/06/2001 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 7d restricted | EMPLOYEE WAS ON A LADDER APPROX 3' ABOVE GROUND. MAINTENANCE WORK WAS BEING PERFORMED ON A GRAVEL CHUTE. THE EMPLOYEE REACHED OUT AND THE LADDER SHIFTED. IN THE PROCESS OF STABALIZING THE LADD ER AND... |
| 01/05/2000 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | TWO MINERS WERE REMOVING A BROKEN CABLE ON A DRAGLINE BUCKET. THE BUCKET AND LINAGE WERE LOCATED ON LEVEL GROUND IN COOL WEATHER CONDITIONS. A CABLE WEDGE WAS BEING DRIVEN OUT OF THE PULL BAIL SOCKET... |