Bouse Junction Plant #1882 — Accidents
Total: 17 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 02/23/2022 | MACHINERY | DYS AWY FRM WRK & RESTRCTD ACT | 132d lost, 274d restricted | EE became entangled in excavator rotary drill steel. Fracture right forearm |
| 07/08/2020 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was installing driveline on Caterpillar 769 Haul truck, driveline fell on outside lower right leg above ankle. |
| 07/01/2020 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee had cut a rubber mat with a razor knife. While picking up the mat, EE struck left thumb with the open razor knife cutting EE's thumb. |
| 09/24/2018 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 10d restricted | Miner was looking for A/C leak when EE's foot slipped from the door way to the track approximately 2 feet. The miner refused medical treatment at the time of injury stating EE's ankle was just sore. T... |
| 09/26/2015 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | The miner was using an acetylene torch to remove an unsupported section of an iron platform. The miner chose to make the final cut from below and to the side instead of from above the section. The sec... |
| 09/08/2014 | STEPPING OR KNEELING ON OBJECT | DYS AWY FRM WRK & RESTRCTD ACT | 14d lost, 3d restricted | Employee was climbing down ladder on 773D haul truck stepped on a 41/2"" rock and twisted his right knee |
| 03/17/2014 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 1d lost | IE was using a hand tool (wrench) to tighten a bolt on skirting rubber, when his hand slipped and got smashed between wrench and steel beam. |
| 01/24/2014 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 41d lost | After refueling, stepping up his ladder into the loader and felt pain just behind and slightly underneath left knee. |
| 06/06/2013 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 42d lost | IE was standing to side of a forklift when the operator of the forklift accidentally pushed on the gas instead of brake while IE was assisting in loading a part onto the forklift. Part of the forklift... |
| 05/14/2013 | MACHINERY | DAYS AWAY FROM WORK ONLY | 283d lost | Turned head to the right to see behind him and felt pain in neck, right shoulder, right arm. |
| 03/08/2013 | HANDLING OF MATERIALS | PERM TOT OR PERM PRTL DISABLTY | None | IE's tip of left index finger was smashed during a repair on a hammer drill. After taken to the emergency room, at approx 3PM IE's finger was removed back to just below the finger nail. IE returned to... |
| 01/30/2013 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was hammering out a bolt in a hole when the hammer struck the washer that was still on the bolt, the washer hit the employee's lip cutting it open. Employee was wearing safety glasses. No los... |
| 06/13/2011 | POWERED HAULAGE | PERM TOT OR PERM PRTL DISABLTY | 1d lost | While working on A/C on truck, reached into fan and cut tip of right hand middle finger almost completely through. |
| 06/02/2008 | OTHER | NO DYS AWY FRM WRK,NO RSTR ACT | None | Tail pulley guard had been removed on the oversize stacker so work on it could be performed. Employee was standing by the guard waiting for the skidsteer to move in so they could attach it and put th... |
| 05/18/2007 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Driving on socket to install bearing, socket broke and cut him by knuckle between pointer finger and middle finger, requiring 5 stitches. |
| 03/23/2005 | SLIP OR FALL OF PERSON | DYS AWY FRM WRK & RESTRCTD ACT | 7d lost, 12d restricted | Employee jumped off tail pulley about 2 1/2 feet to the ground and sprained right ankle. |
| 02/09/2004 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 92d lost | MOVING 50 # BAGS OF ANFO FROM FRONT OF TRAILER TO REAR. TORE MUSCLE AND LIGAMENT IN UPPER RIGHT FOREARM. |