Brushy Eagle — Accidents
Total: 264 accidents | Fatalities: 1
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 07/26/2011 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 22d restricted | While Employee was pulling miner cable out of roadway in the #2 entry he felt extreme pain in his lower back and left upper thigh. Employee went to MedExpress for treatment on Aug 10, 2011 and was put... |
| 07/21/2011 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 5d restricted | Employee was building a stopping approximately 7 1/2 feet high. Employee stood on a cinder block which overturned causing him to stumble twisting his left knee. Employee was taken to Raleigh General H... |
| 03/04/2011 | FALL OF ROOF OR BACK | NO DYS AWY FRM WRK,NO RSTR ACT | None | Member was reaching for drill steel when a rock 36"" wide and 4"" thick fell on his left forearm and shoulder. It cut his forearm with a 4"" gash. Member received 11 stitches at Raleigh General Hospit... |
| 03/01/2011 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 6d lost | Contractor was told to plaster stoppings but had left his plastering gloves on the mantrip, which had already returned outside, so his boss informed him to plaster the stoppings with metacarpal gloves... |
| 12/27/2010 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 132d lost | Member stated he used forklift to try and pick up a piece of belt and turned sharp, causing the forklift to pivot up in the middle and slam his head into the top. He felt a pop in his neck on the left... |
| 12/06/2010 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was making a splice on some cable. While skinning the cable, his utility knife slipped and cut his right hand between the thumb and index finger. |
| 10/28/2010 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 45d lost | EE was watching the scoop to push the rail on rail trucks, the rail got caught on Fender of scoop. EE and another ee decided to push rail over with slate bar. EE put pressure on back of the rail while... |
| 10/21/2010 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | The belt had already been cut and skived. EE was going to trim a little piece of the belt off, when he did the knife slipped and cut his left hand index finger. |
| 09/24/2010 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 2d lost | Member bent over to remove cap coal that had fallen onto his neck, while an approaching shuttle car was turning toward right handed entry, the shuttle cars rearend left side bumped the member. |
| 09/07/2010 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | An unplanned roof fall has occurred at or near spads 4307 & 4442. These are worked out ares of the mine and the falls were found during weekley examinations of airways. No injuries reported. Area deve... |
| 08/27/2010 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 12d lost | Member was in the process of removing a rock measuring 2'Long X 18""wide X 8""thick from inbetween the cats of the miner and the pan, when he bent over to remove the rock he felt a pain in his lower b... |
| 08/23/2010 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | An unplanned roof fall occurred in the track entry, one crosscut inby spad # 0404, in the # 6 break on 2a belt line. The fall measured 20'Long X 12'Wide X 1.5' in Height. No accidents were reported. |
| 05/28/2010 | STRIKING OR BUMPING | DAYS AWAY FROM WORK ONLY | 90d lost | EE was walking down the belt entry when his left shoulder hit a belt hanger causing him to fall backwards onto his SR100 SCSR. EE continued to work until 06-17-2010. Due to continued pain he visited M... |
| 05/05/2010 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 66d lost | Employee was making a belt splice, hammering nails into splice when he felt pain in his right shoulder. He said it was probably where he had a steel plate in it from a previous accident. Didn't report... |
| 04/28/2010 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | Roof fall in the worked out panel of 1st Left off Pug Mains in the #2 Entry at Spad #7399 Roof fall was 60' X 18' X 4'. No injuries or equipment involved. |
| 12/14/2009 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Using a knife to remove a board on belt roller. Knife slipped and went thur glove, cutting the left little finger. |
| 07/18/2009 | HANDLING OF MATERIALS | PERM TOT OR PERM PRTL DISABLTY | 51d lost | While tramming a battery powered Fairchild 35C Injury's middle finger of his left hand became tangled in a nylon cable hanger causing it to pull the distal phlange off. |
| 05/28/2009 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | While making a vulcanize splice, EE cut the top of his left thumb, requiring stitches. |
| 02/24/2009 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was carrying a roll of fly pad(brattice)material, preparing to hang them in #6 entry. As he was walking he fell, cutting his hand on a piece of rock which required 5 stitches. |
| 01/30/2009 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While making a belt splice on the #4 belt, EE attempted to throw a belt clamp across the belt, causing it to hit a water spray bar. It bounced back, hitting him in the left ear, causing a laceration t... |
| 10/08/2008 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE stated when traveling #2 entry in 21 Joy Shuttle Car on #1 section, the miner cable fell down across his roadway. He stopped the car, attempted to hang cable by himself, when he hurt his back. Requ... |
| 09/08/2008 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While attempting to let down a miner cable that was hung up, employee's hand was punctured by a cable hanger requiring 4 stitches. |
| 07/31/2008 | HANDLING OF MATERIALS | DYS AWY FRM WRK & RESTRCTD ACT | 115d lost, 15d restricted | Putting top rollers on belt structure. |
| 07/15/2008 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 27d lost | Member was pushing cable into an entrance gland of the starting box. His foot slipped in some mud causing him to twist his left knee which resulted in a dislocation of his left knee. |
| 07/15/2008 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 198d lost | While riding in the front of a 5 ton supply locomotive that attempted to stop on a slight grade, but started sliding & slid off the end of the track, hitting a parked roof bolter. He refused emergency... |
| 07/15/2008 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 46d lost | Member was lifting a piece of metal for building a rock box and felt pain in his stomach. A small knot came up. He went to the doctor and was diagnosed with a hernia. No surgery has been done at this... |
| 06/26/2008 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was in the process of helping electrician change canopy jack on roof bolter. The jack slipped and pinned his thumb between the jack and the ATRS on the machine causing a laceration that required 24... |
| 06/03/2008 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 58d lost | While crawling in a area that was wet and muddy causing employee's knee pad to be pulled off in the mud, his left knee became twisted resulting in the meniscus. He continued to work until 09/24/2008.... |
| 05/27/2008 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 47d lost | EE was crawling across section when he put his weight on his right arm and it buckled under him and caused him to fall onto his arm and dislocate his elbow. |
| 05/22/2008 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Member was picking up trash in supply yard while trying to throw a piece of crib block into the dumpster he struck his left arm on the dumpster causing a fracture to the lower arm in the area of the e... |
| 02/25/2008 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 40d lost | On 2-25-08 employee twisted his right knee while walking in the intake entry. He continued to work until 4-9-08 without losing any time. Due to continued pain he was informed by his doctor that surger... |
| 02/14/2008 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 24d lost | While loading belt rubber onto a car ee stepped on a rock and twisted his left ankle. |
| 01/05/2008 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | While making up a belt splice, employee was cutting belt. His knife slipped and cut through his glove causing a laceration to his left pinky finger that required 11 stitches. |
| 10/19/2007 | ALL OTHER OCCUPATIONAL ILLNESSES | OCCUPATNAL ILLNESS NOT DEG 1-6 | None | Due to repeated trauma, employee has been diagnosed with severe degenerative arthritis of the spine due to occupational illness. This was not due to a single event and is substantiated by medical reco... |
| 09/13/2007 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Bent over to pick up gloves, hit left elbow on a roof bolt plate causing a laceration that required 4 stitches. |
| 09/06/2007 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | While attempting to cut tape off a lever of a Joy 21 shuttle, the knife slipped causing a laceration to his ring finger of his left hand. The laceration required 3 stitches. |
| 08/23/2007 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While handling belt structure, EE's right middle finger became pinched between the belt tail piece and structure. |
| 08/18/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 99d lost | When employee turned to exit the deck of an Eimco scoop he felt his right knee pop. He continued to work until 8-30-07. |
| 07/20/2007 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While loading belt structure, employee's hand became pinched between two pieces of structure. |
| 06/21/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 31d lost | Employee stated that on 6-21-07 when attempting to hang a miner cable he felt a pain in his back. This accident was not reported until 8/27/07. Employee continued to work until 8-30-07 when instructed... |
| 03/15/2007 | POWERED HAULAGE | PERM TOT OR PERM PRTL DISABLTY | 139d lost | Individual was attempting to pull a matrip to motor barn with another mantrip. The mantrip being towed derailed in a curve and landed on his right foot resulting in fractures. Individual was communica... |
| 03/09/2007 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Individual was tramming bolter for new set up and ran over 8"" ledge causing him to hit his head and ear on canopy resulting in a laceration requiring 7 stitches to ear. |
| 03/05/2007 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | A roof fall measuring 20' X 20' X 5' was discovered by a fireboss approx 3500' from working section. No injuries occurred. The fall will be cleaned up and supported per roof control plan. |
| 01/06/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 19d lost | Employee was moving the continuous miner cable from the roadway when he twisted his right knee. He was seen at the health place on 1-8-07 and was sent for an MRI. On 1-17-07 the results of the MRI wer... |
| 10/07/2006 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While raising tailpiece, guard dropped smashing middle finger. |
| 09/07/2006 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 5d lost | While sawing a timber for use in pillaring, EE was hit in the back with another timber that had been set when another EE bumped it as he was attempting to lay another timber down. |
| 08/22/2006 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 9d lost | While Building a brattice in the x cut between #7 & #8 entry EE was working 18"" away from a check curtain. A 488 Long airdex scoop after stopping and sounding and his bell started through the curtain... |
| 07/26/2006 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | A roof fall occurred on # 2 section in # 3 entry at appromixately 4:50 PM. The roof fall measured 80' long 20' wide and 4' high. The area was supported with 48"" fully grouted resin bolts. There were... |
| 07/17/2006 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 3d lost | Member was setting 8' square 6 x 6 timbers. He knelt down to get a wedge when the timber he was setting fell and struck him in the back. He had not wedged the timber prior to turning it loose to pick... |
| 02/24/2006 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 94d lost | Employee was entering parts building on surface. When entering he turned and twisted right knee. Investigation revealed that there was no stumbling or tripping hazards found. |