CertainTeed Gypsum Manufacturing Inc — Accidents
Total: 12 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 03/07/2024 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Miner working in the Line of Fire. Pressure Release Valve (pop-off) failed; thus, Pressure Transducer broke at fitting, hitting employee in the Face. Miner went to local ER for Evaluation. ER cleaned... |
| 05/08/2023 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | -Miner Working in Line of Fire. -Overconfident in the task. -Did not follow company standards; wrong gloves for the job, did not do a 60's to think before doing the task. Employee was then taken to lo... |
| 05/07/2021 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee working in the ore shed found a hose needing replaced. It was very rigid & bent into an odd position, so the hose was cut out. With the hose disconnected,the employee held it with left hand w... |
| 08/24/2020 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 63d restricted | FEL operator at the crusher was in the process of positioning the bucket over the side of Komatsu truck when EE hit the lever to come down slamming the bucket onto the side of the truck. FEL operator... |
| 11/03/2016 | OTHER | INJURIES DUE TO NATURAL CAUSES | 6d restricted | Left Ankle Sprain. Causation; unknown Employee was working on a D10T and noticed EE's ankle was starting to hurt. No specific incident. Pain worsened and reported to EE's supervisor next morning. Did... |
| 07/28/2012 | HANDLING OF MATERIALS | DYS AWY FRM WRK & RESTRCTD ACT | 80d lost, 46d restricted | 3 maintenance EE's were working on replacing an O-Ring on a Dozer. One EE bumped the engine to force the fuel out of the cylinder, when the fuel entered the IE's right palm but did not exit out the ot... |
| 10/21/2010 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was replacing head gaskets on 100 ton truck. After changing head gaskets, mechanic was in the process of bolting on the intake runners. To access the intake runners, the mechanic placed his left fo... |
| 05/30/2007 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 13d restricted | Operator was waiting for truck to have oil chg completed. Went after a ladder to climb onto truck. Walked back to trk with ladder, attempted to step over a compartment cover left on floor, he tripped,... |
| 08/25/2006 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was changing C-1 belt in the primary crusher pit. He attached a 1.5 ton chain hoist to a I beam to raise the new belt. The hook on the chain hoist was positioned on the I beam at an angle. When the... |
| 02/02/2004 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 10d restricted | Employee was cribbing up, off road truck with crossties, to remove tires & wheels, one tie about 3-4 feet long fell over, employee bent over to pick up, tie was wet, gloves were wet & it slipped in ha... |
| 12/23/2002 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | CRUSHER WAS BEING REPAIRED, A PIECE OF METAL FELL FROM ITS RESTING PLACE AND STRUCK EMPLOYEE ON HARD HAT. THE BLOW UNBALANCED THE EE , HE FELL AND STRUCK HIS HEAD ON A STEEL FRAME, LACERATING HIS SCAL... |
| 02/22/2002 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | A TRANSMISSION WAS BEING LIFTED BY A CHAIN HOIST. EE TOUCHED THE CHAIN AND IT SLIPPED PINCHING HIS LEFT PALM. |