Chantilly Crushed Stone Incorporated — Accidents
Total: 26 accidents | Fatalities: 1
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 01/21/2026 | MACHINERY | DAYS AWAY FROM WORK ONLY | None | While an employee was using a torch to thaw a water line, a Rock came off the plant and struck the employees right hand. |
| 01/10/2025 | HANDTOOLS (NONPOWERED) | DAYS RESTRICTED ACTIVITY ONLY | 61d restricted | Employee was using a chipping motion with a bar to knock ice off of a screen deck prior to running. While doing this, employee's hand made contact with the plant causing a ""right fifth metacarpal fra... |
| 09/10/2024 | HANDTOOLS (NONPOWERED) | DAYS RESTRICTED ACTIVITY ONLY | 6d restricted | Employee was using sledge hammer to knock a shaft out of a water pump for rebuild. While swinging the hammer, employee felt a pop in EE's left side. |
| 06/05/2024 | SLIP OR FALL OF PERSON | DYS AWY FRM WRK & RESTRCTD ACT | 1d lost, 8d restricted | DRIVER WEIGHED AT THE SCALES FOR DELIVERY AND WAS OVERWEIGHT. DRIVER PULLED OFF TO OUR DUMP OFF BIN TO DUMP SOME MATERIAL BEFORE BEING WEIGHED AGAIN. WHILE CLIMBING DOWN TO UNLOCK TAILGATE, DRIVER SLI... |
| 04/24/2024 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 7d restricted | Employee was pressing a sleeve out of crusher with a port a power. After pressing it out, employee began disassembling port a power. During this time the steel cross bar that was holding the port a po... |
| 04/18/2023 | MACHINERY | DAYS AWAY FROM WORK ONLY | 2d lost | Employee reached up through a guard to check belts shortly after the machine turned off. The machine was still in motion and the belts took the employee's fingers through the pulley. |
| 03/28/2023 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 45d lost | Employee was walking to car at the end of day when employee lost balance and fell. |
| 07/06/2022 | HANDTOOLS (NONPOWERED) | DYS AWY FRM WRK & RESTRCTD ACT | 1d lost, 3d restricted | Employee was loosening bolt on a screen. While trying to keep the nut secure, the nut turned and pinched EE's thumb resulting in a small laceration. |
| 04/27/2022 | HANDTOOLS (NONPOWERED) | DYS AWY FRM WRK & RESTRCTD ACT | 1d lost, 2d restricted | Employee was performing maintenance to an articulating truck. As they were loosening the caliper bolts, employee was pushing down on a breaker bar. The bolt came loose and the employee fell forward in... |
| 10/28/2021 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 10d lost | Employee was getting bag out of Pickup truck. Employee stepped on tire to reach bag. Upon lowering back to the ground, the employees leg was injured. |
| 09/16/2020 | HANDLING OF MATERIALS | DYS AWY FRM WRK & RESTRCTD ACT | 1d lost, 7d restricted | Employee was assisting repair in a conveyor belt that broke. While untwisting the belt a rock that was twisted up in the belt came loose and fell, bounced off the beam of the take up pulley and struck... |
| 07/08/2020 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Performing engine repair on 992C Wheel Loader. Cleaning air filter with sanding pad attachment. Piece of metal flew into Left eye. Eye became irritated next day. Given Rx and referred to ophthalmo... |
| 12/11/2019 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 40d restricted | While climbing down a ladder on the plant, the employee slipped and fell into the ladder on the right side. |
| 10/15/2019 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 109d restricted | Employee was unloading a box of welding rods from a truck. The box slipped and while trying to maintain control of the box the employee felt a pull in their shoulder/arm. |
| 07/23/2019 | MACHINERY | DAYS RESTRICTED ACTIVITY ONLY | 8d restricted | Employee was using a cutting wheel to cut a bearing out of a crusher. While cutting the bearing the wheel kicked back and cut the employees right arm. |
| 11/20/2018 | STRIKING OR BUMPING | DAYS RESTRICTED ACTIVITY ONLY | 3d restricted | Employee was cleaning out a feeder shoot on the plant. While clearing out a tree root, employee brushed up against the shoot and cut arm. |
| 08/08/2018 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was carrying a container of welding rods and cut fingers on the container. |
| 06/02/2016 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 85d restricted | After employee finished fueling the drill, employee was putting hoses away. While walking to the truck to hang the nozzle, employee tripped over track marks left in the ground from the drill. |
| 01/31/2016 | SLIP OR FALL OF PERSON | DYS AWY FRM WRK & RESTRCTD ACT | 22d lost, 112d restricted | Employee slipped on ice while climbing down from a loader. EE caught self with EE's arm and felt a pull in EE's shoulder. |
| 06/09/2014 | SLIP OR FALL OF PERSON | DYS AWY FRM WRK & RESTRCTD ACT | 10d lost, 20d restricted | Employee was climbing down a ladder after making repairs to a 992D Loader, when the ladder slipped out from underneath him causing him to fall. while falling he made contact with the tire and injured... |
| 03/19/2007 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 94d lost | The maintenance crew was moving a conveyor up the ramp to the top of the tunnel stockpile area. A Kobelco LK 300A wheel loader was used to move the conveyor up the ramp. The chain used to lift the one... |
| 02/02/2007 | HANDTOOLS (NONPOWERED) | FATALITY | Fatal | The truck owner was replacing a bolt in a pony axle. The owner had a bottle jack under one axle tire and a wooden block under the axle tire beside it. The owner then lowered the axles from the cab, po... |
| 05/20/2002 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE WAS DISASSEMBLING THE FMC MF800 VIBRATORY FEEDER. THE EE WAS INT HE PROCESS OF REMOVING THE FASTNERS FOR THE SECOND COUNTERWEIGHT WHEN THE FIRST COUNTERWEIGHT SPUN ON THE SHAFT. THE EE S RI GHT THU... |
| 02/19/2002 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 3d lost | EMPLOYEE WAS WORKING WITH EMET GUTIERREZ CHANGING A HOIST CABLE ON DB-04C AN 80D NORTHWEST CRANE. THE EMPLOYEE WAS ATTEMPTING TO HOLD THE 1 1/8""CABLE WHILE IT WAS BEING INSTALLED IN THE HOIST DRUM OF... |
| 09/21/2001 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EMPLOYEE WAS EXITING THE CAB OF THE FUEL TRUCK FT-03C, WITH AN UNPROTECTED RAZOR BLADE IN HIS RIGHT HAND. AS HE BEGAN TO CLIMB OUT OF THE CAB, HIS RIGHT HAND STRUCK HIS LEFT HAND WITH THE RAZO R BLADE... |
| 08/07/2000 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 11d lost | EMPLOYEE WAS REMOVEING A 4 LB. HAMMER WHICH WAS USED AS A BLOCKING DEVICE ON THE 6'X14' SCREEN DECK. THE EMPLOYEE'S LEFT MIDDLE FINGER WAS PINCHED BETWEEN THE SCREEN DECK FRAME AND THE HAMMER HANDLE. |