CLEAR CREEK QUARRY — Accidents

Total: 17 accidents | Fatalities: 0

Date Classification Injury Days Lost Narrative
06/25/2025 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None Employee was replacing roll liners in a 992 G bucket at Clear Creek Wed morning. While grinding the bucket to prep for new liners to be installed metal shaving from the grinding had gathered on top of...
05/03/2022 POWERED HAULAGE DAYS AWAY FROM WORK ONLY 1d lost Alleges neck was hurt when the loader operator dropped the boom on side of haul truck. Did not seek medical treatment until 5/5/2022.
03/22/2022 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None EE was in the process of removing the accumulator from the old cylinder when the employee attempted to roll the cylinder over by the manifold. While rolling the cylinder over, EE's finger got smashed...
02/14/2022 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None While switching oxygen bottles on welding truck the safety cap came loose and struck EE in the mouth, chipping front tooth.
03/23/2020 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None While changing out 773 hoist cylinder the cylinder slipped out of the chain on hoist, hit the shop floor and cut IW hand and scrapped EE's upper right leg.
08/09/2016 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None While conducting plant maintenance and unexpected shift in equipment smashed employees finger resulting in a laceration needing 6 stitches.
05/06/2011 POWERED HAULAGE NO DYS AWY FRM WRK,NO RSTR ACT None Two employees were conducting maintenance in a man lift. An inadvertent movement of the bucket momentarily caught the employee between the man lift basket and the speed reducer causing the employee t...
08/09/2005 SLIP OR FALL OF PERSON NO DYS AWY FRM WRK,NO RSTR ACT None Lacerated front right calf after slipping and hitting it against a piece of metal, receiving 8-stitches.
10/25/2004 HANDTOOLS (NONPOWERED) DAYS AWAY FROM WORK ONLY 4d lost While building a new chute, using flat washers as a spacer, a pry bar was used to remove the washers. The chute slipped from the pry bar smashing the tip of the left index finger.
07/30/2004 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None The employee was changing oil in the Komatsu loader using a retractable hose reel to put oil in a reservoir. The employee was checking the dipstick when the hose reel unexpectedly retracted causing t...
05/01/2002 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None EE WAS REPLACING A DUST SUPPRESSION SPRAY BAR UNDERNEATH THE HP500 CRUSHER. THE PIPE WRENCH HE WAS USING SLIPPED AND THE BUTT END OF THE HANDLE STRUCK HIM UNDERNEATH HIS SAFETY GLASSES CAUSING A RUPTU...
10/15/2001 HANDLING OF MATERIALS DAYS AWAY FROM WORK ONLY 175d lost EE PLACED ARM OVER FEEDER SHIRT WALL AND UPWARD INTO CHUTE. MATERIAL FELL OUT CHUTE PUSH ARM DOWNWARD WITH ARM ROTATED THE PRESSURE FROM FALLING MATERIAL HYPEREXTENDED RT ELBOW.
07/16/2001 OTHER NO DYS AWY FRM WRK,NO RSTR ACT None CONDITION CONTRIBUTING = WINDS BLOW DUST.
08/17/2000 OTHER DYS AWY FRM WRK & RESTRCTD ACT 1d lost, 5d restricted EE WAS BENT DOWN ADD OIL TO A HITACHI EX1000. HE HAD BEEN BENT DOWN FOR SEVERAL MINUTES ON THE CATWALK RUNNING ALONGSIDE THE MOTOR COMPARTMENT. WHEN HE STOOD UP, HE STATED THAT HE FELT A TEARI NG SENS...
05/06/2000 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 5d restricted EE WAS FLIPPING CUTTING EDGES ON A WA600 LOADER BUCKET. EE WAS PUSHING UP ON BOLT WITH LEFT HAND& ACCIDENTLY ACTIVATED THE AIR WRENCH THE UNLATCHED BOLT SPUN IN PLACE LACERATING HIS LEFT INDEX FINGER
04/20/2000 MACHINERY DYS AWY FRM WRK & RESTRCTD ACT 4d lost, 23d restricted EE WAS TIGHTENING BOLT ON REAR AXLE OF MACK WATER TRUCK, USING A 3/4"" AIR WRENCH IN RIGHT HAND AND A 1 5/16"" BOXED-END WRENCH IN LEFT HAND. WHILE HOLDING THE AIR WRENCH WITH ELBOW IN AN AWKWAR D POS...
04/06/2000 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 11d restricted EMPLOYEE WAS CHANGING A 1 1/2"" SCREEN CLOTH ON THE TOP DECK OF SIZING SCREEN. HE PLACED THE SCREEN ON TOP OF MOTOR HANGING IT ON A SIDE RAIL SCREEN BOLT. HE THEN BEGAN TO CLIMB UP ON TOP OF MOTOR TO...