Crawford Mine & Mill — Accidents
Total: 23 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 09/18/2025 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 10d restricted | As an employee was attempting to climb into the back of a cargo trailer, their shoulder dislocated. |
| 01/10/2025 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 4d restricted | Employee was using a Front End Loader to feed material to the plants. As EE backed up to get another load of material, the employee backed into another parked front end loader. The employee received... |
| 08/06/2021 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 31d restricted | Employees were reinstalling the belly pan on the undercarriage of the dozer. The rigging on the belly pan slipped allowing it to swing back down and pin the mechanic. The mechanic was diagnosed with t... |
| 04/24/2020 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 10d restricted | An Employee was walking down the stairs when they slipped on the last step and struck their arm on the midrail. |
| 06/14/2018 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 149d lost | A contractor was completing demolition in the decommissioned bagging area. As the employee was pulling on an electrical local disconnect box to remove, the box fell, landing on the employee's lower l... |
| 11/15/2016 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was removing automatic door hinge when one of the arms of the hinge struck ee in the mouth resulting in a laceration that required seven stitches. |
| 07/02/2016 | HANDTOOLS (NONPOWERED) | DAYS RESTRICTED ACTIVITY ONLY | 20d restricted | EE was using a sledge hammer to loosen plug chute and reported sore shoulder to Supervisor. EE did not want to seek professional medical treatment at the time of the incident. On 7/5/2016 EE notified... |
| 04/19/2016 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 42d restricted | EE was walking on a wet concrete slope, lost footing, slipped & fell striking EE's rt wrist. |
| 05/21/2015 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 1d restricted | EE was assisting in removal of the guard on the W16X conveyor tail pulley. He was positioned on the end of the guard attempting to loosen the guard from the excess material around the inside of the ta... |
| 03/24/2015 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 25d restricted | EE was cleaning debris and rocks from the lift cylinder and a large rock fell on right foot. |
| 08/13/2014 | SLIP OR FALL OF PERSON | DYS AWY FRM WRK & RESTRCTD ACT | 99d lost, 55d restricted | EE stepped off of forklift onto muddy surface and hurt left knee. |
| 06/04/2014 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 1d restricted | Employee rolled ankle while walking. Sprain ankle/foot |
| 04/04/2014 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 5d restricted | Employee was shoveling material next to a belt when he felt a sharp pain in his back. |
| 06/27/2013 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 21d restricted | Employee was replacing a hydraulic cylinder when the cylinder slipped and fell pinning his middle finger on his left hand between cylinder and metal step. |
| 01/09/2013 | SLIP OR FALL OF PERSON | DYS AWY FRM WRK & RESTRCTD ACT | 269d lost, 207d restricted | Miner had finished cleaning up a wet concrete floor with the skid steer when he stepped (already out of equipment) on concrete floor and slipped and fell. |
| 06/13/2012 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was completing a welding/grinding operation when he noticed an irritation to his right eye. |
| 07/18/2008 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | A choke-up of a blow line caused the system to shut down. The remedy was to remove the lid from the compressor body and remove any restricting material. The lid blew off when all the nuts were removed... |
| 07/14/2008 | MACHINERY | DAYS RESTRICTED ACTIVITY ONLY | 8d restricted | Team member and accompanying member were preparing to place a sprocket on a shaft. The keyway needed to be dressed so that the sprocket could be installed. A hand grinder was used and it slipped from... |
| 08/30/2004 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Team member was cutting approx. 8 inches off a 4 foot piece of 8 inch pipe. the balance of the 4 foot piece fell from the pipe stand and landed on the team member's right foot. |
| 03/23/2004 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Ee and other maintenance members were repairing the ramp from the hatch opening station. The walkway grating was being lowered into the walkway framework when it fell onto the team member's left hand... |
| 01/28/2004 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | THE INNER CAGE MILL HAMMERS AND CAGE WERE BEING ASSEMBLED. SMALL WOODEN BLOCKS WERE BEING PLACED UNDER EACH BOLT TO SUPPORT IT IN THE RECESSED POSITION. AS THE BAR WAS BEING USED TO RAISE THE RING, PR... |
| 09/12/2002 | HANDTOOLS (NONPOWERED) | DAYS RESTRICTED ACTIVITY ONLY | 3d restricted | INSTALLING A REDUCER TO RADIATOR USING A PIPE WRENCH. WAS TIGHTENING REDUCER TO RADIATOR, PIPE WRENCH SLIPPED & CUT THUMB ON LEFT HAND. |
| 03/19/2001 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | TEAM MEMBERS WERE TO HAUL MATERIAL FROM SI6 TO DUMP AREA. THE TAIL GATE FAILED TO LATCH SO TEAM MEMBER TOOK THE TAILGATE AND PREPARED TO SLAM IT SHUT. HIS FINGER WAS CAUGHT IN THE LATCH ASSEMB LY. |