Crockett — Accidents
Total: 13 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 04/19/2023 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 297d lost | Equipment operator was getting off Komatsu loader. When EE stepped off the ladder, EE twisted the left knee. Due to improper footing. |
| 01/12/2023 | MACHINERY | DAYS AWAY FROM WORK ONLY | 2d lost | EE was welding on a portable tank in the welding shop with the tank sitting on a table, during welding there was a minor ignition that caused the tank to fall off the table striking the victim on the... |
| 02/13/2017 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | While installing a sweat on hub on the loadout belt conveyor drive, the hub stopped moving on the gearbox shaft 1/8"" shy of its desired location. The victim was struck by a glancing blow of a 4 lb.... |
| 06/18/2016 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was prying a form loose. A slate bar slipped and hit employee in the nose, requiring two (2) stitches. |
| 12/17/2014 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Removing gear from gear box of 56DA Crusher, employee ask another employee to pick remaining gear up; as employee picked up remaining gear, it flipped out of his hand and gear struck EE's left hand wh... |
| 11/06/2014 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was beating a rock out of scalping screen using a sledge hammer. While hitting the rock, his right hand on the handle of the sledge came in contact with another rock. He did not seek medica... |
| 03/21/2012 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | Reason unknown trucker climbed upon floats for dredge after they were loaded on a flat bed trailer. He either slipped, tripped or stepped off the float and fell approx 8 1/2 ft to ground striking his... |
| 04/16/2009 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Miner had tightened bolts in scalping screen and was using welder to weld nuts to keep them from loosening up. Slag came off of nut and fell down shirt, landing in navel area of abdomen causing burn. |
| 03/04/2009 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Miner was welding on back plate for skirtboard of Plant Feed Belt when he began to have a headache, face began to tingle and pulse rate increased due to fumes from several welders being blown around d... |
| 12/12/2007 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Moving an oxygen cylinder out of a hoisting cage, the second cylinder fell striking the left little finger of the employee. |
| 10/23/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 2d lost | Employee was cleaning up debris on the bottom floor. A ceramic lined chute was being removed 3 floors above. A 1/2"" X 4"" X 6"" pc of ceramic fell from the chute into the machinery well, bouncing f... |
| 11/08/2005 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 20d lost | Employee was walking outside from loadout office slipped on gravel in parking lot. Employee drove himself to emergency room c pineville hospital. |
| 03/04/2002 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 291d lost | EE WAS LIFTING AN IMPELLER WHILE DOING PLANT MAINTENANCE. AFTER LIFTING THE IMPELLER, HE FELT PAIN INHIS LOWER BACK. EE DID NOT BEGIN MISSING WORK UNTIL 3-11-02. HIS LAST DAY OF WORK WAS 3-8-0 2. |