Doswell Quarry — Accidents

Total: 24 accidents | Fatalities: 0

Date Classification Injury Days Lost Narrative
12/18/2025 POWERED HAULAGE DAYS AWAY FROM WORK ONLY None Employee was operating a 992K loader while loading customer trucks when EE heard a ""pop"" in EE's right wrist while using the control handles.
10/15/2025 HANDTOOLS (NONPOWERED) DAYS AWAY FROM WORK ONLY None Employee for C & L Machine and Welding and foreman for Martin Marietta were standing on-site looking at a tooth on a bucket to see which one had to be removed. Employee tapped the tooth with a hammer...
02/17/2025 SLIP OR FALL OF PERSON NO DYS AWY FRM WRK,NO RSTR ACT None Employee was climbing a ladder to complete a task on the crusher. Employee went to step on to the third rung of the ladder and slipped. Employee landed on the handrail to EE's right. When employee fel...
06/26/2024 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 43d restricted While performing maintenance on a crusher, employee stepped to swing a hammer and dislocated right knee. This injury became reportable on 7/30/2024 when physical therapy was prescribed.
01/17/2024 POWERED HAULAGE ACCIDENT ONLY None A miner was involved in an accident while operating a CAT 777D haul truck that resulted in the truck being turned on it's side. No injuries were reported.
05/22/2023 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 5d restricted Employee stated while using a battery operated grinder to cut a bolt off of a belt roller bracket, the grinder recoiled back striking EE's left knee, resulting in a small laceration requiring 6 suture...
02/05/2019 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 17d restricted Employee was preparing the crusher. When stepping backwards they lost balance contacting the handrail on thier right ribs.
06/21/2018 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 36d restricted Employee was changing the manganese on a 300 cone crusher. While loosening a bolt, employee's left ring finger and left middle fingers got caught between the wrench on the bolt and the ram that was b...
06/17/2016 STEPPING OR KNEELING ON OBJECT DYS AWY FRM WRK & RESTRCTD ACT 2d lost, 25d restricted ***First day of treatment 7/8/16 *** Stepped back off the bumper of a truck onto the ground, stepped on a bag of fence post, twisted ankle
03/08/2013 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 30d restricted Employee had hooked a pipe wrench to the hydraulic cylinder to hold the drill steel while he attempted to loosen the bit. The pipe wrench twisted and dropped, striking and breaking the tip of his fin...
02/12/2013 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None Employee claims he hurt his back lifting a seat assembly out of a 992D FE Ldr. He went to the dr on 2/14/2013 and the doctor returned him to FD and told him to take Tylenol. He rtn'd to the dr on 2/2...
02/08/2012 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 2d restricted The injured employee experienced 2nd degree burns to his right foot. This occurred when hot slag contacted his foot through a hole in his protective footwear.
06/22/2011 OTHER DAYS RESTRICTED ACTIVITY ONLY 2d restricted He was changing screens in the wash screen and reached up and rubbed his arm across the frame and felt soreness in his wrist. He looked and a big whelp was on his arm, just above his wrist with a red...
06/14/2011 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 5d restricted Employee was pulling drawer full of rock out of the Gilson shaker screen and the right hand corner of the drawer stayed in the slot and the left hand corner came out. The drawer tipped left and start...
12/08/2010 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None An employee was inside a screen deck changing screens. Material was frozen to the side of the screen, so another employee was heating the outside of the screen with a propane torch. Debris poped off...
09/29/2010 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 4d restricted While pulling drill steel from a rack on the drill he alleges he slipped and it caused his back to start hurting. He did not fall down.
07/16/2009 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None While loosening bolt on tail pulley bearing, a wrench slipped, mashing the EE's finger between the wrench and frame. The injury resulted in the laceration of the EE's finger, requiring stitches.
03/21/2008 SLIP OR FALL OF PERSON DAYS AWAY FROM WORK ONLY 20d lost EE was stepping from operator platform to bed of boom truck at which time he stated he lost his footing and landed on hit back. He was working in same area as other ee. Other ee turned saw him on grou...
01/07/2008 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 24d restricted Employee was trying to remove a bearing ring located inside the end of a six inch diameter drill hammer. He was using a slide hammer extractor for this task. To accomplish this he had to slide the it...
01/09/2006 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None Using screw driver to replace an old hose clamp on compressor hose with a new one. Screw driver slipped and struck employee's left hand scratching it just above his left thumb.
08/18/2005 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 209d restricted EMPLOYEE WAS TIGHTENING NUT ON BOLT WITH BOX END WRENCH. THE WRENCH SLIPPED OFF THE NUT CAUSING HIS ARM TO JOLT BACKWARDS CAUSING PAIN IN HIS RIGHT SHOULDER.
01/30/2005 HANDLING OF MATERIALS DYS AWY FRM WRK & RESTRCTD ACT 3d lost, 5d restricted EE WAS REMOVING A BUNDLE OF SKIRT BOARDS WITH FORK TRUCK. SKIRT BOARDS WERE BUNDLED TOGETHER WITH A NYLON CHOKER. WHEN THE CHOKER WAS REMOVED, 1 OF THE SKIRT BOARDS (13'6"" LONG X 11"" WIDE) SLID OV...
01/03/2002 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 13d restricted EE WAS PLACING ANGLE STEEL INTO BACK INTO SERVICE TRUCK FELT SHARP PAIN IN BACK WHEN SLIDING STEEL INTO TRUCK.
10/05/2001 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 13d restricted AREA WAS BEING MADE SAFE BY REMOVING LOOSE MATERIAL TO PREPARE FOR WELDING REPAIR INSIDE CHUTE AT THE PRIMARY CRUSHING STATION.