Durham Mine & Mill — Accidents
Total: 27 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 08/14/2025 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 80d restricted | Employee rolled left ankle resulting in a fracture |
| 06/08/2023 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 25d restricted | Employee was descending a ladder following changing a light on a front end loader. Accidently stepped off the second rung and fell. This resulted in a back contusion and restricted duty from occupatio... |
| 03/03/2022 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Secondary plant operator had several pieces of metal embedded into left eye during the shift. The metal most likely came from EE's gloves. Metal was removed and an antibiotic was administered making t... |
| 10/17/2021 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | The employee was changing screens in the wash deck. The screen slid down cutting the wrist of employee. |
| 12/20/2016 | MACHINERY | DYS AWY FRM WRK & RESTRCTD ACT | 30d lost, 10d restricted | Employee's leg was caught in between powder machine and rib resulting in laceration to calf area of left leg. Employee was taken to ER and received stitches. |
| 06/06/2016 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 82d restricted | While scaling, EE was jarred in the seat when the rock the EE was scaling broke free. EE began having pain in back and reported it to supervisor. Resulted in a back strain. No deficiencies found wit... |
| 11/10/2015 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 160d lost | While leaving for the day the scale operator fell on her way to her car. There is a step down from the sidewalk to the parking lot of about 3 inches. When she stepped she caught this drop mid foot w... |
| 06/19/2015 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While using water to spray out built up material in a chute the employee received a splash of water and lime material in the face. Received abrasion and prescribed meds, employee cleared to work with... |
| 09/02/2014 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While working on the crusher feeder employee slipped, pinched his finger between cap he was holding and chute work. Employee failed to report the injury until the next day after seeing his personal do... |
| 12/20/2013 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | The EE was instructed to push in the 3I surge pile. the EE exited his loader to remove cones that were in front of the syntron hole. when the EE went to move the cones he slipped on ice/snow that was... |
| 08/02/2013 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 32d restricted | EE was in the underground shop working on the scaler, EE tripped on the mono-rail and fell to the ground. EE landed on his left knee cause the fracture to the patella. |
| 04/23/2013 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 103d restricted | While exiting the cab of the drill the operator was looking back at the engine compartment checking the AC unit which was worked on earlier that morning. At this point the EE said when he twisted to l... |
| 12/17/2010 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | While shoveling out a corner on Friday, the EE nicked his knuckle on a rock. EE did have gloves on and it did not cut the gloves. EE did not realize he cut his finger until he removed his gloves. When... |
| 03/29/2010 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | Technician installing a wiring harness on a 248 skid loader. The cab was raised supported by the cab safety lock and the hoist. Working conditions were normal, no slippery materials that would have ca... |
| 02/18/2010 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE suffered a non-displaced fracture of tip of his left ring finger. EE was installing a new throat bracket on a 50"" hammer mill. EE was wearing 2 pairs of gloves but had his finger in a pinch point... |
| 12/10/2008 | FIRE | ACCIDENT ONLY | None | At the end of shift as the driller was backing his drill away from a heading, he noticed a fire. He exited the machine and found the flames too intense to activate the onboard fire suppression system.... |
| 10/06/2008 | HANDTOOLS (NONPOWERED) | DYS AWY FRM WRK & RESTRCTD ACT | 3d lost, 81d restricted | Employee was operating a three ton come-a-long tightening a belt for a belt splice. A chain on one of the belt clamps failed and the come-a-long flew back and hit the employee on his left leg. The imp... |
| 11/01/2007 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 28d restricted | Contractor was repairing torque converter output seal, laying on right side platform with his legs extended over the platform. He used his abdomen muscles to arch up to reach back for a wrench and pop... |
| 11/04/2005 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 57d lost | EE claimed to have injured his back on 11/4/05 while holding a 15"" bar in place against the #4 belt. EE received medical attention and eventually surgery before notifying management on 12/13/05 that... |
| 10/25/2004 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 25d lost | Employee was putting left side track on a Cat D3 dozer back together. He was installing a new track pin and struck it with a hammer. A piece of the pin broke off and imbedded in the employees upper le... |
| 11/15/2003 | OTHER | DAYS AWAY FROM WORK ONLY | 157d lost | ON THE LAST DAY SHE WORKED THE EMPLOYEE LEFT THE PROPERTY WITHOUT REPORTING ANY TYPE OF INJURY TO PLANT MANAGEMENT. |
| 03/11/2003 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE WAS MOVING FORKLIFT TINES AND PINCHED INDEX FINGER BETWEEN TINE AND SUPPORTING STRUCTURE. |
| 12/30/2002 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 1d lost | EE'S WERE LIFTING A BAR TO BE INSTALLED INTO THEPRIMARY CRUSHER UNDERGROUND USING A CHAIN AND THE SCALER. THE SCALER OPERATOR WAS INSTRUCTED TO BOOM DOWN TO CREATE MORE SLACK IN THE CHAIN ALLO WING TH... |
| 12/30/2002 | MACHINERY | ALL OTHER CASES (INCL 1ST AID) | None | EE WERE LIFTING A BAR TO BE INSTALLED INTO THE PRIMARY CRUSHER UNDERGROUND USING A CHAIN & SCALER. THE SCALER OPERATOR WAS INSTRUCTED TO BOOM DOWN TO CREAT MORE SLACK TO ALLOW THE CHAIN TO BE TIGHTENE... |
| 07/29/2002 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 135d lost | 3 EE'S WERE REPLAICNG HAMMER TIPS ONT HE CEDAR RAPIDS HAMMER MILL. EE WAS SITTING ON TOP OF THE OPEN LID OF THE MILL WHILE ANOTHER EE WAS ROTATING THE MILL BY HAND USING A LARGE PIPE WRENCH ON T HE FL... |
| 01/21/2002 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 35d lost | EMPLOYEE WAS ATTEMPTING TO SECURE A SMALL CONVEX MIRROR WITH A PAIR OF VICE GRIPS ONTO A SUPPORTING LEG OF AN OVERHEAD BIN. FOOTPRINTS FOUND AT THE SCENE SHOW THAT HE WAS STANDING WITH A FOOT ON A SUP... |
| 02/09/2000 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE WAS REMOVING A DRIVE GEAR @ HEAD SECTION OF UNDERGROUND BELTLINE, WHEN THE GEAR SLIPPED OUT OF THE EE'S HAND CAUSING HIS RIGHT THUMB TO BE LACERATED. |