Enumclaw Pit & Plant — Accidents
Total: 23 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 05/24/2022 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 18d restricted | Driving a haul truck, pinched right thumb in door frame. |
| 03/12/2021 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Wrench hit finger between wrench and truck frame. |
| 01/08/2020 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 3d lost | EE had been suffering from cough, on 1-8-20 EE was jacking up a truck when EE felt a pop in back and ribs. |
| 05/04/2018 | HANDLING OF MATERIALS | DYS AWY FRM WRK & RESTRCTD ACT | 2d lost, 3d restricted | While installing drive shaft into loader, drive shaft slipped and smashed middle finger on right hand. |
| 02/12/2016 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Placing punch plate in place, plate slipped and smashed left ring finger between screen and boot. 6 stitches were received at Enumclaw ER. IE was immediately released to return to work. |
| 04/16/2015 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Had just completed using electrical testing rod. Stood up. Went to put on hard hat with rod still in hand. Rod went under safety glasses and poked eye. |
| 03/20/2015 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was welding using Arc welder. When finished he removed his hood. He then stood up. As he was standing up he bumped the rod causing it to turn on. While it was on he received a flash burn... |
| 06/27/2013 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Two employees were removing a screen when the injured employees crow bar slipped and hit him in the hip. |
| 05/15/2012 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee pinched his finger between a cone and the wedge he was using to secure the cone still while he was turning the bolts on the cone. EMPLOYEE DID NOT REPORT THE INCIDENT UNTIL THE NEXT DAY. HE... |
| 10/26/2011 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | A snap ring was coming off of a radial stacker tire. The employee was trying to repair/reset the snap ring when it popped off the tire, hitting the employee in the right ring finger. The employee need... |
| 08/11/2011 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Strained his lower back when lifting a piece of a machine. Employee did not report this accident officially or visit to doctor. We were made aware of his trip to the doc on 9/2/11 when we received wor... |
| 07/14/2010 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was hitting a part with a rubber mallet. He was holding the part with his left hand. He hammered down catching his left little finger, smashing it. |
| 03/17/2010 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 2d restricted | working in shop, removing spacer on piece of equipment being worked on, top rail slipped, upper piece slipped smashing third and fourth finger on left hand |
| 01/15/2009 | ELECTRICAL | DAYS AWAY FROM WORK ONLY | 30d lost | Employee was working in a fuse box and did not properly shut off the power to the fuse box first. Caused an arc that caused flash burns to employees hands. |
| 06/18/2008 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 259d lost | Employee was using a torch to cut a conveyor frame. When he cut away one portion of the conveyor frame the other portion where he was tied off to began to collapse and slide down a hill. As he tried t... |
| 03/03/2008 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 1d lost | Employee was getting out of a truck, jumped to ground, acute lumbar sprain. |
| 02/13/2008 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 17d lost | Employee was driving a loader and ran over pot holes that jolted him. Jolt caused lumbar strain. |
| 05/02/2007 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was unloading concrete blocks out of the back of a truck when his left thumb got squeezed between the chains used to lift the ecology blocks. Pressure caused a cut in his thumb. |
| 02/19/2007 | POWERED HAULAGE | DYS AWY FRM WRK & RESTRCTD ACT | 29d lost, 21d restricted | One employee was lifting a steel plate with a forklift; injured employee was standing on the ground spotting and giving direction. Forklift got caught on the steel plate underneath the one being lifte... |
| 09/14/2005 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | INDIVIDUAL WAS CUTTING A BELT WITH A UTILITY KNIFE.HE WAS CUTTING WITH A MOTION TOWARD HIS BODY WHEN THE KNIFE RELEASED FROM THE BELT. HE STRUCK HIS LEG WITH THE BLADE. |
| 07/20/2005 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 2d restricted | Employee was climbing down from a conveyor when he stepped down he twisted his knee. |
| 10/08/2004 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | A ROCK LAUNCHED FROM #1 CONE AND HIT EMPLOYEE ON THE LEFT ARM (ELBOW). |
| 03/23/2004 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | WAS RUNNING A 4"" GRINDER AND SOMETHING GOT UNDER HIS SAFETY GLASSES. |