Granite Mountain Qrys-Crystal Hill Plt — Accidents

Total: 27 accidents | Fatalities: 0

Date Classification Injury Days Lost Narrative
05/31/2025 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 44d restricted Employee was working on the Jaw Feeder and was removing the Jaw Grizzly Bars. EE was helping to remove the old Grizzly Bars. One of the bars hung up while EE was trying to move it. When the bar broke...
08/03/2023 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 39d restricted Employee was lifting 1/2"" metal shim into the jaw and felt a pain in their mid-back. EE then went ahead and put the shim into place and back pain continued. EE then notified the supervisor of the bac...
12/01/2022 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 7d restricted Employee was holding bolt head to enable tightening of lock nut. When the impact wrench was activated to tighten the nut, it caused the bolt to spin and crush employee's right middle finger between bo...
04/11/2022 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 1d restricted IE was holding the t-handle punch while co-worker was hitting it with a sledge hammer. Co-worker missed and the hammer hit the side of the crusher causing the hammer to ricochet hitting IE's hand.
01/21/2022 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None Employee was using a pry bar to dislodge a rock in the tail pulley of a conveyor. After the rock was dislodged and employee was sliding out the pry bar, their hand struck a rock and resulted in lacera...
02/01/2021 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 8d restricted EE was cutting a tac weld with grinder that had a cutting wheel. The grinder kicked back and cut EE's finger. EE was wearing gloves
08/24/2018 HANDTOOLS (NONPOWERED) PERM TOT OR PERM PRTL DISABLTY None IE was helping with changing v-belts. The belts were put back on but 1 belt was twisted, so another EE was using a pipe wrench on the shaft and it slipped off causing the belt to roll back pinching IE...
09/25/2015 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 5d restricted He was holding the ladder by a rope out of the way so the rock breaker could get in the jaw to hammer down the side plates. While he was holding the ladder by the rope and guiding the operator the roc...
12/13/2013 SLIP OR FALL OF PERSON NO DYS AWY FRM WRK,NO RSTR ACT None After exiting the excavator he started walking he slipped so to catch himself he put his hand out and a rock cut his hand.
06/25/2013 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None He was adjusting v-belts on the main feeder with a wrench when the wrench came loose it smashed his finger between the I-beam and wrench.
06/07/2013 OTHER DYS AWY FRM WRK & RESTRCTD ACT 34d lost, 33d restricted He had been standing all day running the plant when he turned wrong & hurt his back. He went to the Dr. on 6/10/13 the Dr. said it was a strain and employee went back to work. He was still having some...
02/27/2013 MACHINERY DAYS RESTRICTED ACTIVITY ONLY 1d restricted He was grinding inside the main frame liners in the simmon crusher when a piece of metal got in his right eye. He was wearing all of his PPE, safety glasses, and face shield. He also washed his eye ou...
02/11/2013 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 9d restricted He was cutting a piece of flashing when the blade came out of the flashing cutting his thumb.
11/18/2009 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None The weld broke loose on piece of metal and the porta-power came up and hit him in the nose.
07/29/2009 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 3d restricted Was lifting gear on the side of feeder, putting on cover of the gear on the other side, and standing on unlevel ground. Accident was on 7/29/09 he didn't ask to go to the doctor till 8/13/09.
04/09/2008 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 1d restricted Changing roller bracket got his hand caught in the bracket when it fell off the conveyor. The accident was on 4-9-08 but he didn't go to the doctor till 4-14-08
07/18/2007 POWERED HAULAGE DAYS RESTRICTED ACTIVITY ONLY 2d restricted Bobcat was doing clean up at the hopper when haul truck backing up to dump didn't see the bobcat & bumped the back of bobcat with tire. Employee's neck was hurting.
11/22/2005 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None A piece of metal popped loose and hit what he was swinging (sq. tubing) and hit his leg cutting his leg open.
03/26/2004 ELECTRICAL NO DYS AWY FRM WRK,NO RSTR ACT None MOUNTING A SAFETY COVER OVER BREAKER & IT GROUNDED OUT & BLEW UP.
10/02/2003 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None SANDING TRUCK AND PIECE OF METAL GOT IN EYE.
09/19/2003 HANDTOOLS (NONPOWERED) DAYS AWAY FROM WORK ONLY 51d lost TIGHTENING BOLT ON JAW WHEN WRENCH SLIPPED, HITTING HIS HAND ON JAW FRAME, MASHING THUMB.
08/08/2003 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None PUTTING BELT BACK ON & BREAKING OFF BOLTS - SHAKING BOLT BREAKER CAUSE BOLT WOULDN'T COME OUT. BOLT CAME OUT & PIECE HIT HIM IN LEFT EYE.
03/04/2003 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None THE HYDRAULIC HOSE CRIMPING MACHINE MALFUNCIONED, CAUSING IT TO BREAK & A PIECE HIT HIM IN THE HEAD.
02/26/2001 DUST DISEASE OF LUNGS OCCUPATNAL ILLNESS NOT DEG 1-6 None DIAGNOSED WITH ACUTE SILICOSIS.
05/16/2000 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None WELDING PLATES IN END DUMP BED, CHIPPING WELDS AND PIECE FLEW UNDER HOOD AND GOT IN EYE.
02/12/2000 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None REPAIRING JAW OF CRUSHER, PUTTING TOGGLE BACK INJAW THE SEAT OF THE TOGGLE PLATE FELL OUT AND FELL ON HAND CRUSHING IT.
02/08/2000 MACHINERY NO DYS AWY FRM WRK,NO RSTR ACT None GRINDING METAL AND PIECE OF METAL FLEW IN EYE.