LONE STAR PRYOR PLT MILL & QY — Accidents
Total: 234 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 03/11/2008 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While removing a bar (or bow) that secures a mill door employee strained his back. The pain has not subsided so he had further testing done in early April. Employee began physical therapy for the in... |
| 03/11/2008 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was installing liner plates in the secondary crusher when his right hand was struck with a sledge hammer (not the hammer itself) thus bruising right hand pinky finger. |
| 03/11/2008 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | He bumped his elbow on a steel tube while descending/climbing down into the secondary crusher where he was working thus causing soreness to his right elbow, right forearm and hand. |
| 03/08/2008 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE and another EE were lifting a wear plate to carry it when the other EE dropped his side causing injured EE's back to jerk trying to withstand the weight of the metal. |
| 03/02/2008 | MACHINERY | ALL OTHER CASES (INCL 1ST AID) | None | Employee was using cutting torch, bandsaw and grinder performing work in the kiln installing a platform when a piece of foreign debris entered his right eye. |
| 02/27/2008 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 12d lost | Walking to tool bucket, he stepped on a plate which slipped and fell out from underneath his feet. Left leg went in a hole and he caught self with left arm/shoulder. |
| 09/28/2007 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee cut right ring finger while cutting vacuum hose. Injury required 6 stitches. |
| 05/23/2007 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 13d restricted | Employee was desending a staircase, when his foot slipped, causing him to fall to the ground. He dislocated his left foot in the process. |
| 04/24/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 7d lost | The employee was reaching for a powerpack as a co-worker handed it down to him. He claims he pulled his right shoulder when the other employee dropped the powerpack to him. He reported it, but thoug... |
| 04/14/2007 | POWERED HAULAGE | NO DYS AWY FRM WRK,NO RSTR ACT | None | Worker was attempting to reposition forks. (Forks are hard to move). He let it down with his right hand to push over with his foot, it swung back and smashed finger on left hand. |
| 03/20/2007 | STEPPING OR KNEELING ON OBJECT | DAYS RESTRICTED ACTIVITY ONLY | 5d restricted | Employee was stepping off a mill to the catwalk and stepped on an airhose. He twisted his left knee. Pain persisted so an MRI was done in April, a minor tear was found. Employee has personal health... |
| 03/01/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 5d lost | Employees were charging a ball mill and setting a drum full of balls into a cradle dump when the drum slipped out of choker and struck the employee. He ended up needing surgery on 4-06-07 and this be... |
| 11/07/2006 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was doing overhead work jackhammering hardened product. He slipped when material broke free and jackhammer hit his left hand causing a slight fracture at the last joint of his 4th finger. |
| 07/07/2006 | POWERED HAULAGE | DYS AWY FRM WRK & RESTRCTD ACT | 53d lost, 6d restricted | Employee was attempting to remove a split tire from a conveyor belt when her glove got caught by the wire from the steel belt. This ended up with her arm getting pulled between the head pulley and a... |
| 05/26/2006 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was getting ready to turn off pony motor when coupling came apart. Coupling or guard struck employee in the hand cutting his finger. |
| 03/14/2006 | IGNITION OR EXPLOSION OF GAS OR DUST | ACCIDENT ONLY | None | An employee was attempting to relight the preheat torch when the explosion occured, due to a build up of flammable gas. Initally we were told no 7000-1 was needed then field office called on 6/23/06 a... |
| 03/02/2006 | STEPPING OR KNEELING ON OBJECT | DAYS AWAY FROM WORK ONLY | 41d lost | EE was kneeling on a metal gravity platform welding/cutting for approximately a 10 hour shift shortly after shift ended knee became inflamed. |
| 02/24/2006 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 142d lost | EE WAS THREADING RAW MILL ENTRY COVER THROUGH OPENING AND HE PUSHED THE COVER TO STRAIGHTEN IT UP SO HE COULD SLIDE IT THROUGH THE OPENING. THE CHOKER SLIPPED, CAUSING THE COVER TO SHIFT AND STRIKE H... |
| 02/21/2006 | OTHER | INJURIES DUE TO NATURAL CAUSES | 22d lost | Employee was lifted in a man basket to reach a water valve located in a pipe. the valve was hard to turn. The employee put forth more effort to turn the valve closed. After closing the valve the emplo... |
| 02/16/2006 | OTHER | DAYS AWAY FROM WORK ONLY | 24d lost | Employee injured shoulder back in February and pain persists. I just received the (MRI) results, which show a Rotator Cuff Tear and surgery is required. He is scheduled for surgery on 4-20-2006. Th... |
| 02/15/2006 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee looked at welding arc. burning the corna of both eyes. |
| 12/13/2005 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was dumping sample remains into a drag hopper when some of the product (clinker) blew in his eye. Employee was seen at the ER and was given prescription medication (as in indicated by invoice... |
| 10/06/2005 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was trying to get access to a valve to open it. While using a breaker bar to bust up built up material around the valve he smashed a finger, which resulted in a laceration of same. |
| 09/20/2005 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee twisted her ankle aggravating an old injury. Pain has persisted and employee was sent for follow-up diagnosis. Employee is now in physical therapy to work the tendons and relieve the pain. |
| 08/09/2005 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 3d restricted | Worker was removing a 4160 starter from the housing with a co-worker, when the starter rotated on its pivot point and smashed his hand at the hand hold. |
| 08/03/2005 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee slipped and fell off roof after hooking roof to crane for removal. |
| 07/29/2005 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was trimming weeds and got something (piece of grass or weed) in his eye. |
| 07/22/2005 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 69d lost | Employee was raising electric cart to perform repair. Cart fell hitting employee on the foot fracturing 2 of his toes. |
| 06/01/2005 | DISORDERS (PHYSICAL AGENTS) | OCCUPATNAL ILLNESS NOT DEG 1-6 | None | WORK WAS BEING DONE IN THE MILL BUILDING, DUCT WAS BEING INSULATED WHILE OPERATIONAL, OUR INSULATOR SUFFERED MILD HEAT EXHAUSTION |
| 04/06/2005 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee alleges that he had released the handle so that he hopper would raise foreward and as he was looking in another direction the hopper rocked back causing the handle to strike his little finger... |
| 03/06/2005 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | An ee was using a beater hammer to knock a gear off of a shaft while injured was sweating the gear. A piece of steel came off of the hot gear and embedded into ee's right cheek. |
| 03/04/2005 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 5d lost | EE IS UNSURE HOW INJURY OCCURRED. HE HAS A MUSCLE STRAIN IN HIS MIDDLE BACK. IT WAS A GRADUAL ONSET. EE IS UNSURE WHEN INJURY ACTUALLY HAPPENED - ACTUAL DATE OF ACCIDENT IS UNKNOWN. (A-C EQUIPMENT... |
| 01/24/2005 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee alleges that he was hit in the face with some dust while beating the dust lines to the dust collector. Dust entered the Right eye. |
| 01/19/2005 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee alleges that he struck his little finger (right hand) against a valve while pushing a bar through a port hole to unplug the port hole of material that was caked in side the dust tank. |
| 01/06/2005 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee alleges that he slipped on icy surface while walking. Employee struck his left hip and left arm on the pavement and continues to have problems with left hip. |
| 10/19/2004 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee alleges that he was removing a sprocket from gear box off of #3 finish mill elevator. Employee hit sprocket with hammer causing sprocket to chip. Employee alleges chip struck his right leg... |
| 09/30/2004 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee alleges he was using a box cutter to cut the tape off of a flex hose so that he could use the 4"" flex hose. The tape was holding a 3"" hose and 4"" hose together. Cutter slipped and cut to... |
| 09/20/2004 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee alleges that a piece of dust fell from the kiln, at the tire door, and went into his eye. Doctor prescribed medication. |
| 08/11/2004 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 6d restricted | EMPLOYEE ALLEGES THAT HE HAS PAIN BETWEEN SHOULDERS. HE STATED HE DOES NOT KNOW IF OR WHEN HE MAY HAVE HURT IT. HE ALLEGES IT HAS BEEN HURTING FOR THE LAST 24 HOURS. |
| 08/06/2004 | NONPOWERED HAULAGE | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee alleges that he injuried his right knee (knee popped) while pushing a wheel barrow loaded with coal refines. (approx. weight 50 lbs). |
| 03/30/2004 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was welding, raised welding hood then chipped weld and got piece of slag in his left eye. ee did not realize this at the time, ee determined this after his shift ended at 7 am and was taken to the... |
| 03/22/2004 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | He was plugging into a 100 ton hydraulic jack and the pop off valve went off and sprayed hydraulic fluid into his eyes. |
| 03/19/2004 | STEPPING OR KNEELING ON OBJECT | NO DYS AWY FRM WRK,NO RSTR ACT | None | EMPLOYEE STEPPED OFF A FORKLIFT AND DIRECTLY ONTO A PIECE OF WELDING WIRE THAT WAS LAYING THERE IN THE GROUND AND THIS WELDING WIRE PUNCTURED THE BOTTOM OF EMPLOYEE'S SHOE AND THEREFORE ALSO PUNCTURIN... |
| 03/19/2004 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE WHILE WALKING TRIPPED & CAUGHT HIS FALL TOWARDS THE GROUND WITH HIS RIGHT ARM, THUS INJURING/BRUISING HIS RIGHT SHOULDER. X-RAY AT E.R.- BRUISED, BUT NO WORK RESTRICTIONS. EE NOTIFIED EMPLOYER ON... |
| 03/09/2004 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE HAD BEEN CUTTING, & HAD HIS FACE SHIELD ON, & HE WAS FINISHED FOR A MINUTE, SO HE PUT THE SHIELD UP IN THE STORED POSITION. WHILE IN THAT POSITION, DUST SETTLED ON IT, THEN HE LOOKED UP AT HIS FELL... |
| 03/04/2004 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 8d lost | PULLING A 4,000 LB. BEARING, IT GOT HUNG UP. THEY WERE TRYING TO GET IT LOOSE AND THE BEARING FELL ON HIS LEFT FOOT. |
| 03/03/2004 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | BUZZI UNICEM EMPLOYEES WERE CLEANING OUT A KILN & HAD STEEL BALLS SCATTERED ON FLOOR. EE STEPPED OUT OF KILN & DIDN'T SEE THE BALL ON THE FLOOR. |
| 03/03/2004 | FALLING/SLIDING/ROLLING MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE AND CO WORKER HAD GONE DOWN TO THE GROUND LEVEL TO TAKE THEIR LOCKS OFF A DISCONNECT IN THE MOTOR CONTROL CENTER. EE WAS TO GO BACK UP ONT HE LANDING WHERE THE MOTOR WAS AND THEN TO SIGNAL HIS WORK... |
| 02/25/2004 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | A MAN INSIDE KILN WAS HAMMERING A PLATE TO RELASE IT WHEN A PIECE OF STEEL SLIVERED OFF AND STRUCK EUGENE IN THE CHEEK. |
| 12/04/2003 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE CLAIMS HE GOT HIS RIGHT KNUCKLE CAUGHT IN BETWEEN A HEAVY BAR AND SOME ANGLE IRON. HE WAS TRYING TO CLEAN OUT THE CHUTE FROM #4 BELT TO THE #5 BELT. |