Lucky Friday — Accidents
Total: 488 accidents | Fatalities: 2
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 07/31/2013 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Handing wooden post to partner and it slipped. Reached out to grab it and sliver enter finger. Became infected. |
| 07/18/2013 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 2d restricted | EE was opening a bundle of 4' split set bolts, as he broke the 1 inch strap on the bolts, it hit him in the right forearm causing a laceration. |
| 07/15/2013 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 3d restricted | EE was packing two bundles of monster mats and two bundles of split set plates to an area they were preparing to bolt. Previous shift had bolted in the area earlier in the day. As the EE bent down to... |
| 07/09/2013 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee injured his left shoulder(A/C ligament) while removing a bolt from a victaulic coupling. Bolt was rusted and employee was using a ratchet with socket to remove the nut when he felt a pain in... |
| 06/16/2013 | HOISTING | ACCIDENT ONLY | None | The new pinion brake that was installed on the #2 hoist would not release. They had to be released mechanically. Upon initial investigation by the design engineers a power surge was the cause. |
| 06/11/2013 | HOISTING | ACCIDENT ONLY | None | The #2 hoist had to be shut down because a loose hydraulic fitting sprayed fluid on the motor of the hoist. We were installing a new pinion brake and a mechanic forgot to tighten all the fittings. Whe... |
| 05/21/2013 | HOISTING | ACCIDENT ONLY | None | Silver Shaft Hoist tripped out due to a weather related Power bump. |
| 05/17/2013 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | The employee fractured his left thumb when it was pinched between the flanges on the ventline during installation in the shaft. |
| 04/29/2013 | HOISTING | ACCIDENT ONLY | None | It was discovered the brakes on the hoist would not release due to low pilot air pressure. Discovered automatic drain was stuck open and venting off part of the pilot air pressure. A new drain was ins... |
| 04/08/2013 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 4d restricted | EE was pulling on two dwyidags that were caught under some laggin when he felt a pain in his lower back. |
| 03/25/2013 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE got his left middle finger caught between the jackleg and the chuck tender while trying to change out a drill steel. |
| 02/11/2013 | HOISTING | ACCIDENT ONLY | None | Conveyance will not build up enough amps to lift a loaded conveyance(muck) from the 5970 level. |
| 02/10/2013 | HOISTING | ACCIDENT ONLY | None | Won't build amps on the south side of the move loaded (muck) conveyance up the shaft from the 5970 level. |
| 01/28/2013 | HOISTING | ACCIDENT ONLY | None | The retainer ring grove on the fulcrum pin on the drum brake shoe will no longer hold the 1/16 thick retainer snap ring in place. The fulcrum pin and the two brake guide rod assemblies have not moved... |
| 01/07/2013 | SLIP OR FALL OF PERSON | DYS AWY FRM WRK & RESTRCTD ACT | 77d lost, 231d restricted | EE slipped and fell in the drift on 4900. EE did not receive treatment of any kind until 4/23/2013. When EE fell he heard a pop in his right shoulder as he tried to catch himself on the rib and bed of... |
| 12/31/2012 | HANDLING OF MATERIALS | ALL OTHER CASES (INCL 1ST AID) | None | Employee was helping pull a jackleg steel from the drilled hole when he felt a pain in the stomach area. He went to the doctor and diagnosed with a hernia. He was given a full release to come back to... |
| 12/31/2012 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 100d restricted | Employee missed the step while walking up the stairs into the offices. Employee injured shoulder but did not seek medical treatment until 2/4/2013. EE was placed on restricted duty. |
| 12/25/2012 | HOISTING | ACCIDENT ONLY | None | Hoist had been shut down the past 24 hours for Christmas Holiday. Silver Shaft Hoistman was in the process of running shaft and performing pre-shift checks. Hoist would intermittently shut down in a C... |
| 12/17/2012 | HOISTING | ACCIDENT ONLY | None | At Approximately 7:30 pm Silver Shaft Hoist came to a controlled stop. The hoistman noticed that the north side brake had started to drag and immediately called a mechanic. The proportion valve was... |
| 11/29/2012 | DISORDERS (PHYSICAL AGENTS) | OCCUPATNAL ILLNESS NOT DEG 1-6 | 1d restricted | EE was bolting in an intersection and became overheated. EE was taking to clinic and received IV fluids. |
| 11/10/2012 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was stacking bundles of 4' split sets and dropped two bundles on his right foot. Initially first aid on site. went to the doctor on 11/26/2012 and x ray revealed a fracture. |
| 10/26/2012 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 38d restricted | The employee was pulling on a jackleg drill to bring the steel out of the hole when he slipped and strained his back. |
| 10/17/2012 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | While retrieving an head board from a loose yet still banded unit of head boards (wood). The employee cut his hand on the exposed sharp edge of the banding material. The cut was approx. 1/4"" deep and... |
| 10/06/2012 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was sitting on the station at the end of shift when he felt something in his right eye. Eye was wearing eye protection at the time. Employee was cutting off split sets earlier in the day. |
| 10/01/2012 | HOISTING | ACCIDENT ONLY | None | The ventilation system (dampers) for the cooling system for the west hoist motor malfunctioned causing the hoist motor to overheat. |
| 09/10/2012 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 34d restricted | Employee was bolting in the crown of the drift when the split set driver hung up in the bolt. Employee pulled on the jackleg and freed it, but started to lose his footing. Employee grabbed at the jack... |
| 06/28/2012 | MACHINERY | DAYS RESTRICTED ACTIVITY ONLY | 11d restricted | Employee injured his left shoulder when the drill steel he was drilling with hit an existing bolt causing the jackleg to spin. |
| 06/20/2012 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | The employee removed a hair from his right eye around 11:30 am. The employee wasn't aware of when the Foreign Body entered his eye. The employee was cleaning a tool out with compressed air around 11... |
| 06/18/2012 | HOISTING | ACCIDENT ONLY | None | The Coupling between the East Hoist Motor and the Tachometer was loose causing the hoist to have an e-stop while hoisting the crew down. |
| 06/17/2012 | HOISTING | ACCIDENT ONLY | None | The Hoistman was lowering the south conveyance down to the Galloway Deck with one Employee on the conveyance when the hoist suddenly sped up on its own. The Hoistman hit the e-stop button to stop the... |
| 05/07/2012 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee drove CAT 950H loader to staging area at the Pond 4 site. He parked the machine at the staging area. He picked up the wheel chocks from the storage area on the loader and threw them to the... |
| 05/03/2012 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 7d lost | In the process of digging a sump ditch, employee bent over to pick up a pick axe. When he was standing up, he twisted at the waist and felt a pain. |
| 05/02/2012 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was tightening a bolt when the ratchet slipped of the end of the bolt head and hit him in the upper lip. Employee required stitches to close up the wound. |
| 12/27/2011 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE assumed the operation of the jackleg drilled out for and installed four bolts then moved over to his left to begin the next row. He drilled three bolt holes and was on the 4th hole, which was about... |
| 12/14/2011 | FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL | DYS AWY FRM WRK & RESTRCTD ACT | 21d lost, 76d restricted | We had a rock burst on 12/14/2011 which injured the employee. |
| 12/14/2011 | FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL | DYS AWY FRM WRK & RESTRCTD ACT | 30d lost, 75d restricted | A rock burst occurred in the main drift, injuring 7 miners. The miners were there installing a tunnel liner. |
| 12/14/2011 | FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL | DAYS AWAY FROM WORK ONLY | 32d lost | A rock burst occurred on the 5900 main drift while employees were constructing a tunnel liner, seven miners were injured. |
| 12/14/2011 | FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL | DAYS AWAY FROM WORK ONLY | 32d lost | A rock burst occurred in the main drift while employees were constructing a tunnel liner, seven miners were injured. |
| 12/14/2011 | FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL | DAYS AWAY FROM WORK ONLY | 52d lost | A rock burst occurred in the main drift while employees were constructing a tunnel liner.Seven miners were injured. |
| 12/14/2011 | FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL | DAYS AWAY FROM WORK ONLY | 110d lost | A rock burst occurred in the 5900 main drift while employees were constructing a tunnel liner. Seven miners were injured. |
| 12/14/2011 | FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL | DAYS AWAY FROM WORK ONLY | 110d lost | A rock burst occurred in the 5900 main drift while employees were constructing a tunnel liner, seven miner were injured. |
| 11/30/2011 | HOISTING | ACCIDENT ONLY | None | The Silver Shaft hoist shut down due to a 5 amp fuse that blew out in the power supply. |
| 11/17/2011 | SLIP OR FALL OF PERSON | FATALITY | Fatal | Two miners working in an underground bin excavation were attempting to level the muckpile by blowing muck down a hole at the brow. They were both tied to retractable fall restraints when the muckpile... |
| 11/17/2011 | DISORDERS (REPEATED TRAUMA) | OCCUPATNAL ILLNESS NOT DEG 1-6 | None | Employee has been diagnosed with Carpal Tunnel from repetitive use of his hands |
| 11/16/2011 | FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL | ACCIDENT ONLY | None | We experienced a rock burst on the 5900 mainline during our scheduled blasting time. The rock burst measured over a 2.8 Richter. The rock burst caused some damage in the 5900 54 Ramp as well. |
| 11/07/2011 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 32d restricted | Employee fractured his right thumb when it got pinched between the hook on the crane and the pallet lifter. employee was attempting to unhook the load. |
| 11/02/2011 | DISORDERS (REPEATED TRAUMA) | OCCUPATNAL ILLNESS NOT DEG 1-6 | None | Employee was diagnosed with Carpal Tunnel on 12/08/2011 due to repetitive use of her hands. |
| 10/11/2011 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 2d restricted | Employee was lifting a piece of pipe and strained his lower back. |
| 10/05/2011 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 8d restricted | Employee cut his hand on the rib while driving a tractor, he came too close to the rib and cut his palm. |
| 10/05/2011 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 35d lost | AFTER EMPLOYEE PULLED A CORE TUBE OUT FROM THE DRILL, HE WAS WALKING OVER TO UNLOAD THE CORE FROM THE TUBE AT THE TUBE RACK AND HE TRIPPED ON THE HELPER'S DECK CAUSING HIM TO FALL WITH THE TUBE IN HIS... |