Sandy Flat Quarry — Accidents
Total: 20 accidents | Fatalities: 1
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 03/08/2025 | STEPPING OR KNEELING ON OBJECT | DAYS AWAY FROM WORK ONLY | None | employee was greasing lines on the C 20 conveyor belt, as EE walked to the counterweight guarding EE stepped on something making EE twist and roll EE's knee |
| 12/27/2024 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employees were hanging a 2"" angle iron 107"" long above the v-belts on the 7' crusher. They set the angle iron in place for welding and SE's end fell and it pinched EE's hand between the angle iron... |
| 05/26/2022 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was changing screens when a section of screen media slipped from employee's hands and sharp edge struck employee's upper leg, resulting in a laceration. |
| 05/25/2022 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was organizing parts in a store room when a small hydraulic cylinder rolled onto employee's finger, resulting in a laceration and three small fractures to the rt. index finger |
| 05/05/2022 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was strapping down a load on a flat bed trailer. While adjusting chains, employee lost balance and fell from the trailer, landing face forward, resulting in contusions and a minor fracture to... |
| 07/09/2019 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was removing a clevice from a lifting cable after moving a crusher head. When the clevice pin was removed, tension on the cable caused the clevice to spin, striking the employee on the chin.... |
| 05/13/2019 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 95d restricted | Employee was climbing down from a conveyor frame to the catwalk (approx. 3 ft. below) when they lost grip. As they reached out to catch themselves, allegedly they grabbed the handrail, their body cont... |
| 09/30/2010 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 4d restricted | One employee was assisting another employee unload steel plates from a freight truck. After sliding the plates off the truck, they attempted to move one of the plates out of the roadway. At this poi... |
| 05/28/2010 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was adjusting air conditioning vent when his finger accidentally came in contact with fan blade resulting in a laceration that required sutures. |
| 04/29/2008 | OTHER | INJURIES INVOLVNG NONEMPLOYEES | None | The Greenville County Sheriff's Department responded to a suicide fatality. The victim's body was discovered in a pond on mine property at 4:25 PM. Plant management was notified at that time and an i... |
| 10/22/2007 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 109d restricted | Employee was changing rubber screen cloth at the wash plant screen. As one new screen panel was placed on the upper deck it begin to slide into the discharge chute. Employee was standing on the upper... |
| 06/15/2007 | HANDLING OF MATERIALS | PERM TOT OR PERM PRTL DISABLTY | None | Tech was reinstalling rim base componets. He had his left hand on componets adjusting to position properly..side ring slipped from tire positioning hand and caught finger tips of fingers on left hand... |
| 02/05/2007 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee helping loosen a hydraulic hose on a 988F FEL. When the hydraulic hose fitting broke loose, he struck his right hand against the loader cowling, dislocating his right ring finger. His finger... |
| 07/27/2006 | MACHINERY | DAYS RESTRICTED ACTIVITY ONLY | 2d restricted | A Hammer Operator breaking a boulder in the pit. The boulder was large and his point was approximately 6 feet off the ground. When the hammer point broke through the rock, the base of the hammer hit... |
| 07/10/2006 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Three employees tilted the rock over the conveyor edge where it dropped against frame and caught employees right thumb between the rock and conveyor idler. |
| 06/16/2006 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 2d restricted | Rubber tired loader operator was running the machine with malfunctioning electrical magnetic locks on the hoist and tilt controls. In the manual mode more effort is required and the operator strained... |
| 04/05/2006 | FIRE | ACCIDENT ONLY | None | The dry grass along the public highway caught fire and spread to the mine property. The fire was reported it to mine management. A dozer cut a fire break through the woods and the company water truck... |
| 11/05/2005 | POWERED HAULAGE | NO DYS AWY FRM WRK,NO RSTR ACT | None | While employee was operating front end loader, he turned on the air conditioning. When the fan came on, particles blew in and into employees eyes. Employee was taken for medical treatment, where he... |
| 07/23/2004 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | After cutting a piece of steel, the employee picked it up to load it onto a truck. As he picked it up, he rubbed his arm against the edge of the steel plate, causing a 1"" long laceration on his fore... |
| 09/26/2003 | MACHINERY | FATALITY | Fatal | TIRE SERVICE TECH WAS POSITIONING A 50 TON DUMP TRUCK TIRE WHEN THE TIRE FELL FROM THE BOOM CLAMP TRAPPING TECH BETWEEN TIRE AND BOOM TRUCK BED AND FRAME. MINOR DAMAGE TO THE BOOM TRUCK BUT FA TALLY I... |