Table Mountain Plant & Quarry — Accidents
Total: 12 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 08/06/2020 | SLIP OR FALL OF PERSON | DAYS RESTRICTED ACTIVITY ONLY | 46d restricted | Employee was performing maintenance on a screen deck. Upon completion of work the employee descended down the screen deck ladder. While descending the ladder the employee slipped on a rung and lost fo... |
| 06/19/2019 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 22d lost | EE was attempting to remove a bearing on screen deck 4 of the rock plant using a Port-a-Power and H-Puller. When pressure was applied the threads were stripped and the H-Brace struck EE in EE's left s... |
| 02/15/2017 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 343d lost | Injury first reported to Foreman on 3/29/17. Date of incident and time are approximate. Employee has burning sensation in left shoulder joint when pulling fuel hose from reel on lube truck to fuel 3... |
| 05/20/2015 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was removing pin from side plate on loader bucket. While driving the pin out with a hammer, the hammer glanced the pin and struck a hard-face dot causing the dot to fragment. A metal piece... |
| 04/24/2014 | HANDLING OF MATERIALS | DAYS RESTRICTED ACTIVITY ONLY | 11d restricted | Employee pinched fingers while pulling a roller into a hose reel on his service truck. |
| 06/10/2010 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 19d restricted | Vehicle with non-power steering and a small material pile. |
| 06/23/2009 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 3d lost | Employee was loosening a bolt off a loader when the wrench broke, came back and hit him in the right eye. |
| 06/19/2009 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | while on a shot, tripped on a rock, hit right forearm on rock. |
| 05/15/2009 | HANDTOOLS (NONPOWERED) | DYS AWY FRM WRK & RESTRCTD ACT | 1d lost, 12d restricted | Employee was hammering a wedge into a pin to close the door on the jaw crusher. |
| 09/26/2003 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | EMPLOYEE WAS REMOVING ANVILS FROM A CRUSHER UNIT. A PULLING TOOL COULD NOT BE FOUND, SO EMPLOYEE WAS USING A CHIPPING HAMMER TO EXTRACT THE ANVILS. THE HAMMER SLIPPED, PIERCING HIS LIP AND CHIPPING A... |
| 07/25/2003 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 63d lost | HE STRAINED HIS KNEE WALKING ON UNEVEN GROUND. |
| 11/22/2000 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 11d lost | EE WAS CHANGING THE LIMIT SWITCH ON THE OIL WAY HOPPER INJ EE WAS HOOKING UP SOME WIRE THAT OPENED A OIL VALVE & OVER FILLED THE WAY HOPPER CAUSING HOT OIL TO SPILL OUTO F THE HOPPER ON TO INJ EE |