Taylor # 1 — Accidents
Total: 44 accidents | Fatalities: 0
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 03/11/2018 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 20d lost | Was hooking up trailer loaded with strucker, was lifting up trailer tong with come along when welding rods broke and trailer fell on leg. |
| 03/27/2017 | MACHINERY | DAYS RESTRICTED ACTIVITY ONLY | 3d restricted | Roof bolting causing tendonitis from repetitive motion and strain on wrist leading to ee elbow |
| 07/25/2016 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 2d lost | While bending a roof bolt something in chest pulled. |
| 07/09/2016 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | Roof fall in #8 entry on 001 section due to slick and slide it was app. 60' long, 16' wide, 8' high. Partly covering S/C |
| 07/06/2016 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | Doing weekly run, found rock fall in old works in travel way. |
| 03/10/2016 | POWERED HAULAGE | NO DYS AWY FRM WRK,NO RSTR ACT | None | Was driving mantrip the wheel caught a rock causing the knee on the steering wheel to spin around and then catching EE's hand hard. |
| 03/19/2015 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 14d restricted | While unhooking chain on front of scoop he put his left hand down to balance his self putting his finger's in between the ram and the back of the scoop bucket. The scoop operator sucked the ram in to... |
| 03/10/2015 | SLIP OR FALL OF PERSON | DAYS AWAY FROM WORK ONLY | 331d lost | While realigning a come-a-long he slipped and hit his side and ribs on belt structure. |
| 01/07/2015 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | 2d lost | While making a belt splice in the #5 belt, employee was holding a 6 ft board under the splice. When co-worker was pounding in the splice, the hammer slipped hitting employee's finger. |
| 11/18/2014 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | We believe that due to a lack of cable bolts in an intersection which had slick & slides in the top it caused the top to weaken & fall. |
| 10/22/2014 | SLIP OR FALL OF PERSON | NO DYS AWY FRM WRK,NO RSTR ACT | None | After shutting the belt off the belt man was crossing over belt when he lost his footing twisting his knee |
| 09/25/2014 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | When weekly examiner was traveling the bleeders with MSHA they discover a intersection had fell above anchorage in IE2 panel. The air way had not been blocked but alternet rout of travel was put in to... |
| 05/15/2014 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 1d lost | While loading post into a scoop bucket pulled muscle in back |
| 04/06/2014 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 16d lost | Pulled back opening airlock doors. |
| 03/17/2014 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Loading tool box, box tipped mashed thumb. |
| 08/06/2013 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Was spreading pallet lime. Inhaled, have swollen throat, and trouble swallowing. |
| 03/19/2013 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 320d lost | Driving mantrip pulled thru check curtain caught mantrip pulled nail out of plate flew hit him in left eye. |
| 09/12/2012 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | In intersection 1 block inby last open cross cut roof had slick and sides fell 9-10' high. |
| 09/05/2012 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 9d lost | Backing up a trailer piece of waterline caught slide up hit him in face. |
| 06/27/2012 | MACHINERY | DAYS AWAY FROM WORK ONLY | 16d lost | While bolting he had his hand on roof bolt. Swung head in hitting his hand on canopy. |
| 02/02/2012 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 5d lost | While putting waterline in he was pounding two joints together with a crib he missed the end of the water line and pinched the end of his middle finger. |
| 07/28/2011 | FALL OF ROOF OR BACK | DAYS AWAY FROM WORK ONLY | 84d lost | EE was bolting when drill steel touched top dislodge rock falling striking him on top of hand. |
| 07/14/2011 | MACHINERY | DAYS AWAY FROM WORK ONLY | 41d lost | Bolter was backing up ee left foot got under back bumper coming off ledge. |
| 03/25/2011 | ELECTRICAL | NO DYS AWY FRM WRK,NO RSTR ACT | None | While working on highline cable in the power center the electrician failed to bleed off a locked and tagged highline resulting in a small static shock of a assistant who was helping him. |
| 02/07/2011 | MACHINERY | DAYS AWAY FROM WORK ONLY | 65d lost | Had drill steel in bolter chuck, when swung head in to drill inside hole, drill steel fell out and hit him on the forearm. |
| 06/11/2010 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | Roof fall in return area of old worked out panel one block inby spad 1768. Rock fell about 8 to 10 inches above bolts in the intersection this did not damper the ventilation. |
| 01/29/2010 | FALL OF ROOF OR BACK | DAYS AWAY FROM WORK ONLY | 11d lost | While the bolting crew was bolting a corner, the section boss was watching them bolt. The bolting crew told him to move from where he was because of loose rock. He didn't and a rock and head coal mix... |
| 02/27/2009 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | In the last open cross cut of the # 3 Heading. The roof fell 18' by 25' by 4 1/2 to 6 ft high. |
| 12/23/2008 | MACHINERY | DAYS AWAY FROM WORK ONLY | 6d lost | Employee was running helper side of bolter. Bolter tire ran over his left foot. |
| 11/12/2008 | FALL OF ROOF OR BACK | DAYS AWAY FROM WORK ONLY | 2d lost | EE was moving a shuttle care cable when s loose rock 6"" thick 2"" long struck him on his left shoulder. |
| 08/13/2008 | MACHINERY | DAYS AWAY FROM WORK ONLY | 2d lost | While bolting a cross cut EE went to swing out the bolting head and went too far pushing his body into the rib. |
| 06/19/2008 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 22d lost | Received a doctors note on the 26th. EE supposedly was loading bolts on bolter, when he hurt his back. Nothing was said to his foreman at time of accident. At end of shift on the 19th, I talked to EE... |
| 02/27/2008 | MACHINERY | DAYS AWAY FROM WORK ONLY | 77d lost | EE did not use proper precautions to move roof bolter. He did not keep his body and head inside of the machine when moving the machine. |
| 01/23/2008 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 2d lost | While bonding a intake stopping he used his bare hands to put b-bond on a block stopping, he was offered a pair of gloves. He choose not to use them. |
| 10/03/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 48d lost | While setting post employee was reaching down to pick up a wedge and another post hit him on the fingers. |
| 07/23/2007 | EXPLODING VESSELS UNDER PRESSURE | DAYS AWAY FROM WORK ONLY | 3d lost | EE was operating left side of bolter, installing a roof bolt, when a hose busted and sprayed hydo oil in face and chest area. |
| 06/18/2007 | FALL OF ROOF OR BACK | DAYS AWAY FROM WORK ONLY | 3d lost | Rock fell out of top. |
| 05/10/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 1d lost | He caught middle finger on right hand in sheave wheel while pulling belt. |
| 04/24/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 3d lost | Caught left foot between scoop bucket & p/c. |
| 03/19/2007 | HANDLING OF MATERIALS | DAYS AWAY FROM WORK ONLY | 3d lost | Employee came to work and turned in a doctor's note saying he hurt his back but did not report it to his boss or to me when it happened |
| 01/08/2007 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | He was a bolter operator off side operator was advancing lift, when off side operator misplaced foot bolter tire ran over it. |
| 09/13/2006 | FALL OF ROOF OR BACK | ACCIDENT ONLY | None | Roof fall in spad 959 60' outby in #1 heading. Measured roughly 15' high, 12' wide, 40' long. Horseback slip fell out 8 feet of rock. |
| 02/06/2006 | FALL OF ROOF OR BACK | DAYS AWAY FROM WORK ONLY | 5d lost | ROCK FELL HIT HAND WHILE RUNNING BOLTER |
| 01/31/2005 | MACHINERY | DYS AWY FRM WRK & RESTRCTD ACT | 1d lost, 1d restricted | TRAMMING BOLTER TOO CLOSE TO RIB, LEANED OUT OF OPERATORS DECK WHILE STILL TRAMMING MACHINE WHICH RESULTED IN GETTING HEAD CAUGHT BETWEEN CANOPY OF MACHINE AND RIB. SENT TO EMERGENCY ROOM FOR EXAM, RE... |