Yard 88 - Pontiac — Accidents

Total: 20 accidents | Fatalities: 0

Date Classification Injury Days Lost Narrative
06/05/2025 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None During crusher maintenance that involved rotating crusher blow bars, one employee was using a sledgehammer to dislodge the blow bar wedges. While striking the wedge, the employee missed and inadverten...
10/08/2024 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None While attempting to reattach a fallen guard on a crusher discharge tail pulley belt, an employee grabbed the guard through the openings and began to lift it into place. During this process, the guard...
06/27/2024 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 43d restricted Employee used skid steer to take crusher blow bar pallets off of delivery truck. Once pallets were on ground employee tried sliding one blow bar to another skid to condense and stack skids for loading...
03/12/2023 HANDLING OF MATERIALS DAYS AWAY FROM WORK ONLY 95d lost Operator was installing a new return roller when it slipped out of position and pinched the employee's finger between the roller and frame
05/19/2021 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 28d restricted Employee was showing another employee how to use quick disconnect on CAT skid steer. Used foot to move the lever and pant leg got caught. Employee was un-successful in catching self, EE lost EE's ba...
04/18/2020 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None HDPE Pipe had fallen and workers were attempting to lift the pipe back up. Pipe became lodged behind angle iron and closer worker bent down to get a tool to try and pry the HDPE pipe loose. At that m...
06/11/2019 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 44d restricted Employee was looking under the truck for an oil leak, when turned away stepped on a 3 to 4 inch rock and fell and fractured hand.
03/11/2015 HANDTOOLS (NONPOWERED) DAYS RESTRICTED ACTIVITY ONLY 21d restricted He took a wrench and tried to loosen slide bolts, after a few turns, employee attempted one last turn and the wrench slipped off the bolt. The pressure from the wrench hyper-extended his thumb causing...
02/07/2013 SLIP OR FALL OF PERSON DAYS RESTRICTED ACTIVITY ONLY 31d restricted Employee got out of loader to retrieve a piece of metal from the work area. Stepped on golf-ball size rock, causing his foot to slip. He fell onto his knee and felt a pop. Went to hospital and was...
07/08/2009 HANDTOOLS (NONPOWERED) NO DYS AWY FRM WRK,NO RSTR ACT None Employee was using wrench to adjust take up on tail pulley. Strained muscle while pulling on wrench.
09/24/2008 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None Lifting five-gallon bucket of rock to put into splitter for testing.
04/25/2008 SLIP OR FALL OF PERSON ALL OTHER CASES (INCL 1ST AID) None While helping change screens on screening units, tripped over cable that was attached to rollaway to pull chute away from screen, resulting in contusions to right hand and knee.
04/04/2007 OTHER NO DYS AWY FRM WRK,NO RSTR ACT None windy conditions, blowing debris around. debris entered eye around safety glasses
12/14/2005 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None While shoveling rock from under conveyor, had sharp pain in back of neck.
12/13/2005 HANDLING OF MATERIALS DAYS RESTRICTED ACTIVITY ONLY 4d restricted While performing repairs to hazemag crusher, during repairs bumped elbow.
10/17/2005 SLIP OR FALL OF PERSON DAYS AWAY FROM WORK ONLY 14d lost EMPLOYEE WAS WALKING ON CONVEYOR BELT. HE LOST HIS FOOTING. EMPLOYEE FELL 15 FEET 5 INCHES TO THE GROUND. POSSIBLE BACK, LUNG AND RIB INJURIES ON LEFT SIDE.
03/09/2005 ELECTRICAL DAYS AWAY FROM WORK ONLY 5d lost Wiring secondary disconnect box without proper lock-out causing electrical burn to hand. Written disciplinary action taken.
10/04/2004 HANDLING OF MATERIALS NO DYS AWY FRM WRK,NO RSTR ACT None Another employee dropped ladder - hitting employee on head.
02/04/2004 HANDLING OF MATERIALS DAYS AWAY FROM WORK ONLY 7d lost LIFTING CONVEYER BELT OF ROLLED STEEL.
02/02/2004 HANDTOOLS (NONPOWERED) NO VALUE FOUND None Prying a 6' piece of steel, bar slipped off pinch point.