Lucky Friday — Accidents
Total: 488 accidents | Fatalities: 2
| Date | Classification | Injury | Days Lost | Narrative |
|---|---|---|---|---|
| 02/07/2026 | MACHINERY | DAYS AWAY FROM WORK ONLY | None | Miner got a foot caught between a push plate and stop block resulting in a fractured first and second toe on left foot. |
| 12/14/2025 | HANDTOOLS (NONPOWERED) | DAYS AWAY FROM WORK ONLY | None | Miner was scaling with a scaling bar and a rock fell onto the scaling bar and the weight of the rock resulted in downward momentum of the bar and the employee pinched their right hand between the scal... |
| 12/03/2025 | HOISTING | ACCIDENT ONLY | None | While performing start of shift hoist checks, the weight brake would not release once it was set. |
| 11/24/2025 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Miner was sealing a new airlock door and the door came into contact with left ring finger causing a tuft fracture to the fingertip. |
| 10/10/2025 | HOISTING | ACCIDENT ONLY | None | While performing the daily safety checks on the hoist, the hoist operator pushed the emergency stop button to test the weight brake and the hoist tripped on an E-stop fault. Electricians assisted the... |
| 09/24/2025 | HANDTOOLS (NONPOWERED) | NO DYS AWY FRM WRK,NO RSTR ACT | None | Miner was attempting to get a socket seated onto a corroded nut on a vic coupling by hitting the socket with a pipe wrench. EE missed the socket and struck EE's left thumb with the pipe wrench. |
| 09/19/2025 | HOISTING | ACCIDENT ONLY | None | At 4:15am the hoistmen was attempting to clutch in when the weight brake set and EE could get it to release. Maintenance was called and found that a safety was tripped causing the hoist to dump air p... |
| 08/20/2025 | POWERED HAULAGE | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was operating an open cab haul truck and while turning a strand of wire from the wire mesh ground support on the rib caused a puncture wound to the back of the employee's left shoulder requir... |
| 07/13/2025 | HOISTING | ACCIDENT ONLY | None | Silver Shaft hoist operator heard noise coming from the drum while the hoist was in operation. The hoist operator called maintenance to come inspect the hoist and they found that a saddle and both nut... |
| 06/27/2025 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | Employee was trimming the front wallplate with a battery powered saw and while making a cut, the saw slipped causing a laceration to employee's thigh. Employee received 8 sutures. |
| 06/17/2025 | HOISTING | ACCIDENT ONLY | None | Silver Shaft hoist was down due to east pinion brake trip fault that would not reset. |
| 04/28/2025 | HOISTING | ACCIDENT ONLY | None | The hoist tripped due to the gap on the right brake stand-2 upper caliper was detected on the hoist control system to be outside of tolerance at 2mm. The gap was checked and adjusted to 0mm at which t... |
| 04/16/2025 | HOISTING | ACCIDENT ONLY | None | Lost incoming power to the mine site for a short period of time due to a weather event which caused the hoists to trip. The hoists and compressors needed to be reset and started back up. Hoists were b... |
| 04/14/2025 | POWERED HAULAGE | DAYS AWAY FROM WORK ONLY | 93d lost | Employee was transporting a tote of diesel fuel and got a flat tire on the 1-yard forklift they was using to transport the fuel. Employee was pulling into a cutout to get it out of the roadway and as... |
| 04/07/2025 | FIRE | ACCIDENT ONLY | None | Miner was mucking into a muck bay with a 2-Yard LHD. They had a full bucket and when attempting to dump it they got on uneven ground and as they raised the bucket the loader tipped over onto the right... |
| 04/07/2025 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was moving a jumbo drill steel and pinched left ring finger between the steel and the metal box on the loader fender. |
| 03/16/2025 | HOISTING | ACCIDENT ONLY | None | At 12:37 AM the hoist tripped due to a communication fault. |
| 02/18/2025 | DISORDERS (REPEATED TRAUMA) | OCCUPATNAL ILLNESS NOT DEG 1-6 | 19d lost | EE was diagnosed with Carpel Tunnel Syndrome after 40 plus years of mining. |
| 12/18/2024 | HOISTING | ACCIDENT ONLY | None | After 2 weather related power bumps, the hoist tripped and was not able to be reset due to ""Brake Pump #2"" and ""Safety Circuit Fault"" codes. |
| 11/30/2024 | HOISTING | ACCIDENT ONLY | None | When the hoistmen tried to reset the Service Hoist it would not reset and gave a YA1 fault. The hoistmen called electricians and while diagnosing they found a bad fuse. Electricians replaced fuse and... |
| 11/03/2024 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was opening a gate and got fingers caught between the pole for the gate and the fencing. |
| 10/20/2024 | ENTRAPMENT | ACCIDENT ONLY | None | While the shaft crew were working in the shaft we lost power to the hoist. The electrical dept was able to isolate the issue and get power to the hoist again. |
| 10/11/2024 | HANDLING OF MATERIALS | DYS AWY FRM WRK & RESTRCTD ACT | 14d lost, 70d restricted | Employee was moving a 45kva transformer unit when the unit caught of the decking and fell over pinching EE's right ring finger. |
| 10/02/2024 | POWERED HAULAGE | DAYS RESTRICTED ACTIVITY ONLY | 5d restricted | Employee was finishing mucking scraping the face when something struck the employee in the right side of the forehead. |
| 09/08/2024 | HOISTING | ACCIDENT ONLY | None | The hoist tripped out at 4:10 PM. The electricians on duty found a loose relay in the PLC is what caused the hoist to trip. |
| 08/30/2024 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was installing a 18"" split set with a Jackleg. As the EE was pulling the jackleg out of the bolt, the jackleg pivoted and pinched EE's hand between the jackleg and the wingnut. |
| 08/09/2024 | HOISTING | ACCIDENT ONLY | None | The air pressure to the Silver Shaft hoist got too low to operate the hoist due to two compressors shutting down. |
| 07/19/2024 | HOISTING | ACCIDENT ONLY | None | At 2:20 the hoistmen tried to start 2 shaft hoist but it would not start. Electricians were called to diagnose problem and found the pinion break pressure was at 70 psi which needed to be 1500 psi to... |
| 04/25/2024 | HOISTING | ACCIDENT ONLY | None | A flashover on the brush holder boxes occurred in the hoist motor causing the hoist to be down. |
| 04/13/2024 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was manually moving a barrel of oil onto the containment when it started to tip. EE tried to stop the barrel from tipping and got hand caught between the barrel and a steel I-beam. |
| 02/02/2024 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | Driller and helper were adjusting the height of the control panel while the driller was getting ready to insert the pin the panel was released and smashed EE's thumb causing a crushed fingernail that... |
| 01/27/2024 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was re-installing the guard onto the tail pulley of BC-5 when the guard slipped from their hands and pinched 2 fingers on right hand. |
| 10/22/2023 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE smashed right thumb between lock bar and cage door on the top deck of the service hoist. EE was attempting to open the cage doors while it was stopped at the 5900 level when the incident occurred. |
| 10/22/2023 | HOISTING | ACCIDENT ONLY | None | Hoistman had a fault on the Service Hoist which would not allow the hoist to operate. Electricians found a faulty brake gap sensor and replaced it. |
| 09/24/2023 | HOISTING | ACCIDENT ONLY | None | It was determined that the YA1 converter breaker was defective and needed to be replaced. After consulting with ABB's drive specialists and changing out the breaker, the service hoist was tested multi... |
| 08/13/2023 | FIRE | ACCIDENT ONLY | None | At 10:30 pm there was a report that 2-shaft top station was hazier than normal but gas readings with a Ventis pro 5 gas detector were normal. A supervisor bump tested an MX6 gas monitor & accompanied... |
| 07/12/2023 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE pushed the 4' split set bolt into the drilled hole in the back by hand. As EE was positioning self to drive the bolt the rest of the way in with the jackleg, the bolt fell out of the hole and struc... |
| 06/01/2023 | HOISTING | ACCIDENT ONLY | None | The compressor plant went down causing the mine to lose compressed air. The brakes on the hoist would not release because it takes compressed air to release them. |
| 05/26/2023 | HANDLING OF MATERIALS | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was removing an electrical jumper cable from the rib and felt a ""pop"" in EE's stomach. EE was diagnosed with a small hernia. EE continued mining at full capacity. EE elected to have a procedure t... |
| 05/22/2023 | HOISTING | ACCIDENT ONLY | None | A breaker for the battery backup for the #2 hoist tripped during a severe weather event during the night. This caused the batteries to wear down because they could not charge due to the tripped breake... |
| 05/09/2023 | HOISTING | ACCIDENT ONLY | None | A lightning strike caused one of our main Avista (Power Company) transformer to break down. We lost all power to the site and could not operate the Silver Shaft Hoist. |
| 03/17/2023 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was struck in the face by a rock that was dislodged from the face. The miner was installing a bolt into the fingers of the bolter when the bolt hit the face, a rock slide down the bolt and struck t... |
| 02/16/2023 | DISORDERS (REPEATED TRAUMA) | OCCUPATNAL ILLNESS NOT DEG 1-6 | 27d lost | EE suffering from Carpal Tunnel |
| 02/07/2023 | DISORDERS (REPEATED TRAUMA) | OCCUPATNAL ILLNESS NOT DEG 1-6 | 52d lost | EE is suffering from carpel tunnel syndrome |
| 01/17/2023 | DISORDERS (REPEATED TRAUMA) | OCCUPATNAL ILLNESS NOT DEG 1-6 | 45d lost | EE suffering from carpel tunnel |
| 11/17/2022 | POWERED HAULAGE | NO DYS AWY FRM WRK,NO RSTR ACT | None | EE was operating a haul truck on the mainline when they felt something go into their eye. EE was taken to the eye clinic and checked out. EE was given a full release at that time. On 11/21/2022 they c... |
| 09/03/2022 | MACHINERY | NO DYS AWY FRM WRK,NO RSTR ACT | None | While bolting a piece of rock fell through the chain link fencing and struck the employee in the arm. |
| 08/10/2022 | HOISTING | ACCIDENT ONLY | None | Electricians were performing annual battery replacement for the KA1 control cabinet. While replacing the batteries for the hoist controller PLC UPS the breaker feeding the hoist controller PLC was tri... |
| 08/09/2022 | HOISTING | ACCIDENT ONLY | None | The hoist would not reset following beginning of shift tests. |
| 07/05/2022 | HOISTING | NO DYS AWY FRM WRK,NO RSTR ACT | None | The employee reported feeling something enter EE's left eye while riding down the shaft on the conveyance. The employee reported that EE was wearing safety glasses, but the material entered between th... |